Package | Description |
---|---|
org.safs.model.commands | |
org.safs.tools.drivers |
Modifier and Type | Method and Description |
---|---|
static DriverCommand |
DriverCommands.appMapChaining(java.lang.String mode)
Enable and Disable support for App Map chaining.
|
static DriverCommand |
DDDriverCommands.appMapChaining(java.lang.String mode)
Enable and Disable support for App Map chaining.
|
static DriverCommand |
DriverCommands.appMapResolve(java.lang.String mode)
Enable and Disable support for embedded DDVariables in App Map strings.
|
static DriverCommand |
DDDriverCommands.appMapResolve(java.lang.String mode)
Enable and Disable support for embedded DDVariables in App Map strings.
|
static DriverCommand |
DriverCommands.assignClipboardVariable(java.lang.String varName)
Copy the clipboard contents to a DDVariable.
|
static DriverCommand |
DDDriverCommands.assignClipboardVariable(java.lang.String varName)
Copy the clipboard contents to a DDVariable.
|
static DriverCommand |
DriverCommands.breakpoints(java.lang.String mode)
Enable and Disable Breakpoint Debugging.
|
static DriverCommand |
DDDriverDebugCommands.breakpoints(java.lang.String mode)
Enable and Disable Breakpoint Debugging.
|
static DriverCommand |
DriverCommands.callCycle(java.lang.String[] parameters)
Invoke a Cycle table (from StepDriver or SuiteDriver)
Since the Cycle is executed as a driver command
and NOT as a test record, the call to the
Cycle itself is not counted as a test pass or a test fail.
|
static DriverCommand |
DDDriverFlowCommands.callCycle(java.lang.String[] parameters)
Invoke a Cycle table (from StepDriver or SuiteDriver)
Since the Cycle is executed as a driver command
and NOT as a test record, the call to the
Cycle itself is not counted as a test pass or a test fail.
|
static DriverCommand |
DriverCommands.callCycle(java.lang.String cycleName,
java.lang.String cycleSeparator,
java.lang.String parameterName)
Invoke a Cycle table (from StepDriver or SuiteDriver)
Since the Cycle is executed as a driver command
and NOT as a test record, the call to the
Cycle itself is not counted as a test pass or a test fail.
|
static DriverCommand |
DDDriverFlowCommands.callCycle(java.lang.String cycleName,
java.lang.String cycleSeparator,
java.lang.String parameterName)
Invoke a Cycle table (from StepDriver or SuiteDriver)
Since the Cycle is executed as a driver command
and NOT as a test record, the call to the
Cycle itself is not counted as a test pass or a test fail.
|
static DriverCommand |
DriverCommands.callJUnit(java.lang.String className)
Invoke one or more JUnit tests using the provided Class name(s).
|
static DriverCommand |
DDDriverFlowCommands.callJUnit(java.lang.String className)
Invoke one or more JUnit tests using the provided Class name(s).
|
static DriverCommand |
DriverCommands.callRemote(java.lang.String[] parameters)
Execute a command on an external system / application.
|
static DriverCommand |
DDDriverCommands.callRemote(java.lang.String[] parameters)
Execute a command on an external system / application.
|
static DriverCommand |
DriverCommands.callRemote(java.lang.String protocol,
java.lang.String systemName,
java.lang.String serviceName,
java.lang.String command,
java.lang.String varName,
java.lang.String parameters)
Execute a command on an external system / application.
|
static DriverCommand |
DDDriverCommands.callRemote(java.lang.String protocol,
java.lang.String systemName,
java.lang.String serviceName,
java.lang.String command,
java.lang.String varName,
java.lang.String parameters)
Execute a command on an external system / application.
|
static DriverCommand |
DriverCommands.callScript(java.lang.String[] parameters)
Invoke a custom script with passed parameters/variables, if desired.
|
static DriverCommand |
DDDriverFlowCommands.callScript(java.lang.String[] parameters)
Invoke a custom script with passed parameters/variables, if desired.
|
static DriverCommand |
DriverCommands.callScript(java.lang.String scriptName,
java.lang.String parameterName)
Invoke a custom script with passed parameters/variables, if desired.
|
static DriverCommand |
DDDriverFlowCommands.callScript(java.lang.String scriptName,
java.lang.String parameterName)
Invoke a custom script with passed parameters/variables, if desired.
|
static DriverCommand |
DriverCommands.callStep(java.lang.String[] parameters)
Invoke a Step table from within another Step table (from StepDriver).
|
static DriverCommand |
DDDriverFlowCommands.callStep(java.lang.String[] parameters)
Invoke a Step table from within another Step table (from StepDriver).
|
static DriverCommand |
DriverCommands.callStep(java.lang.String stepName,
java.lang.String stepSeparator,
java.lang.String parameterName)
Invoke a Step table from within another Step table (from StepDriver).
|
static DriverCommand |
DDDriverFlowCommands.callStep(java.lang.String stepName,
java.lang.String stepSeparator,
java.lang.String parameterName)
Invoke a Step table from within another Step table (from StepDriver).
|
static DriverCommand |
DriverCommands.callSuite(java.lang.String[] parameters)
Invoke a Suite table (from StepDriver or SuiteDriver)
You cannot use CallSuite in a CycleDriver test table.
|
static DriverCommand |
DDDriverFlowCommands.callSuite(java.lang.String[] parameters)
Invoke a Suite table (from StepDriver or SuiteDriver)
You cannot use CallSuite in a CycleDriver test table.
|
static DriverCommand |
DriverCommands.callSuite(java.lang.String suiteName,
java.lang.String suiteSeparator,
java.lang.String parameterName)
Invoke a Suite table (from StepDriver or SuiteDriver)
You cannot use CallSuite in a CycleDriver test table.
|
static DriverCommand |
DDDriverFlowCommands.callSuite(java.lang.String suiteName,
java.lang.String suiteSeparator,
java.lang.String parameterName)
Invoke a Suite table (from StepDriver or SuiteDriver)
You cannot use CallSuite in a CycleDriver test table.
|
static DriverCommand |
DriverCommands.callTestNG(java.lang.String testNGParameters)
Invoke TestNG tests using the provided TestNG parameters.
|
static DriverCommand |
DDDriverFlowCommands.callTestNG(java.lang.String testNGParameters)
Invoke TestNG tests using the provided TestNG parameters.
|
static DriverCommand |
DriverCommands.captureMousePositionOnScreen(java.lang.String[] parameters)
Capture the location of the mouse pointer relative to the screen and save the x and y components into variables.
|
static DriverCommand |
DDDriverCommands.captureMousePositionOnScreen(java.lang.String[] parameters)
Capture the location of the mouse pointer relative to the screen and save the x and y components into variables.
|
static DriverCommand |
DriverCommands.captureMousePositionOnScreen(java.lang.String x_VariableName,
java.lang.String y_VariableName)
Capture the location of the mouse pointer relative to the screen and save the x and y components into variables.
|
static DriverCommand |
DDDriverCommands.captureMousePositionOnScreen(java.lang.String x_VariableName,
java.lang.String y_VariableName)
Capture the location of the mouse pointer relative to the screen and save the x and y components into variables.
|
static DriverCommand |
DriverCommands.cleanString(java.lang.String[] parameters)
CleanString, for each char in string: if ((char .gt.
|
static DriverCommand |
DDDriverStringCommands.cleanString(java.lang.String[] parameters)
CleanString, for each char in string: if ((char .gt.
|
static DriverCommand |
DriverCommands.cleanString(java.lang.String sourceString,
java.lang.String resultVar)
CleanString, for each char in string: if ((char .gt.
|
static DriverCommand |
DDDriverStringCommands.cleanString(java.lang.String sourceString,
java.lang.String resultVar)
CleanString, for each char in string: if ((char .gt.
|
static DriverCommand |
DriverCommands.clearAllVariables()
Clear storage of all DDVariables.
|
static DriverCommand |
DDDriverCommands.clearAllVariables()
Clear storage of all DDVariables.
|
static DriverCommand |
DriverCommands.clearAppMapCache()
Clear the internal application map cache.
|
static DriverCommand |
DDDriverCommands.clearAppMapCache()
Clear the internal application map cache.
|
static DriverCommand |
DriverCommands.clearArrayVariables(java.lang.String arrayName)
Clear storage of all SAFS variables containing a specific prefix.
|
static DriverCommand |
DDDriverCommands.clearArrayVariables(java.lang.String arrayName)
Clear storage of all SAFS variables containing a specific prefix.
|
static DriverCommand |
DriverCommands.clearClipboard()
Clear the contents of the Window's clipboard.
|
static DriverCommand |
DDDriverCommands.clearClipboard()
Clear the contents of the Window's clipboard.
|
static DriverCommand |
DriverCommands.closeApplication(java.lang.String applicationID)
Close a named application process launched with LaunchApplication.
|
static DriverCommand |
DDDriverCommands.closeApplication(java.lang.String applicationID)
Close a named application process launched with LaunchApplication.
|
static DriverCommand |
DriverCommands.closeApplicationMap(java.lang.String applicationMap)
By map ID, Close a opened Application Map in map chain.
|
static DriverCommand |
DDDriverCommands.closeApplicationMap(java.lang.String applicationMap)
By map ID, Close a opened Application Map in map chain.
|
static DriverCommand |
DriverCommands.closeFile(java.lang.String fileNumber)
Close the open file with the file number provided
|
static DriverCommand |
DDDriverFileCommands.closeFile(java.lang.String fileNumber)
Close the open file with the file number provided
|
static DriverCommand |
DriverCommands.commandDebug(java.lang.String mode)
Enable and Disable (C)Command Debugging.
|
static DriverCommand |
DDDriverDebugCommands.commandDebug(java.lang.String mode)
Enable and Disable (C)Command Debugging.
|
static DriverCommand |
DriverCommands.compare(java.lang.String[] parameters)
Compares two strings and returns an integer specifying the
result of the comparison.
|
static DriverCommand |
DDDriverStringCommands.compare(java.lang.String[] parameters)
Compares two strings and returns an integer specifying the
result of the comparison.
|
static DriverCommand |
DriverCommands.compare(java.lang.String sourceString,
java.lang.String dstString,
java.lang.String resultVar,
java.lang.String regexMatch)
Compares two strings and returns an integer specifying the
result of the comparison.
|
static DriverCommand |
DDDriverStringCommands.compare(java.lang.String sourceString,
java.lang.String dstString,
java.lang.String resultVar,
java.lang.String regexMatch)
Compares two strings and returns an integer specifying the
result of the comparison.
|
static DriverCommand |
DriverCommands.concatenate(java.lang.String[] parameters)
Concatenate String1 with String2 and returns concatenated string.
|
static DriverCommand |
DDDriverStringCommands.concatenate(java.lang.String[] parameters)
Concatenate String1 with String2 and returns concatenated string.
|
static DriverCommand |
DriverCommands.concatenate(java.lang.String string1,
java.lang.String string2,
java.lang.String resultVar)
Concatenate String1 with String2 and returns concatenated string.
|
static DriverCommand |
DDDriverStringCommands.concatenate(java.lang.String string1,
java.lang.String string2,
java.lang.String resultVar)
Concatenate String1 with String2 and returns concatenated string.
|
static DriverCommand |
DriverCommands.copyDBTableColumnToFile(java.lang.String[] parameters)
This routine will copy the contents of one or more DBTable column(s) to a file.
|
static DriverCommand |
DDDriverDatabaseCommands.copyDBTableColumnToFile(java.lang.String[] parameters)
This routine will copy the contents of one or more DBTable column(s) to a file.
|
static DriverCommand |
DriverCommands.copyDBTableColumnToFile(java.lang.String aDBAlias,
java.lang.String aTableAlias,
java.lang.String dBSourceName,
java.lang.String fileOut,
java.lang.String sQLQuery,
java.lang.String directoryOut,
java.lang.String sQLStatus,
java.lang.String delimiter,
java.lang.String userID,
java.lang.String password)
This routine will copy the contents of one or more DBTable column(s) to a file.
|
static DriverCommand |
DDDriverDatabaseCommands.copyDBTableColumnToFile(java.lang.String aDBAlias,
java.lang.String aTableAlias,
java.lang.String dBSourceName,
java.lang.String fileOut,
java.lang.String sQLQuery,
java.lang.String directoryOut,
java.lang.String sQLStatus,
java.lang.String delimiter,
java.lang.String userID,
java.lang.String password)
This routine will copy the contents of one or more DBTable column(s) to a file.
|
static DriverCommand |
DriverCommands.copyDBTableToFile(java.lang.String[] parameters)
This routine will copy the contents of a DBTable to a file.
|
static DriverCommand |
DDDriverDatabaseCommands.copyDBTableToFile(java.lang.String[] parameters)
This routine will copy the contents of a DBTable to a file.
|
static DriverCommand |
DriverCommands.copyDBTableToFile(java.lang.String aDBAlias,
java.lang.String aTableAlias,
java.lang.String dBSourceName,
java.lang.String fileOut,
java.lang.String dBTableName,
java.lang.String columnCount,
java.lang.String rowCount,
java.lang.String sQLQuery,
java.lang.String delimiter,
java.lang.String directoryOut,
java.lang.String sQLStatus,
java.lang.String userID,
java.lang.String password)
This routine will copy the contents of a DBTable to a file.
|
static DriverCommand |
DDDriverDatabaseCommands.copyDBTableToFile(java.lang.String aDBAlias,
java.lang.String aTableAlias,
java.lang.String dBSourceName,
java.lang.String fileOut,
java.lang.String dBTableName,
java.lang.String columnCount,
java.lang.String rowCount,
java.lang.String sQLQuery,
java.lang.String delimiter,
java.lang.String directoryOut,
java.lang.String sQLStatus,
java.lang.String userID,
java.lang.String password)
This routine will copy the contents of a DBTable to a file.
|
static DriverCommand |
DriverCommands.copyFile(java.lang.String[] parameters)
Copy the specified filename to the target filename.
|
static DriverCommand |
DDDriverFileCommands.copyFile(java.lang.String[] parameters)
Copy the specified filename to the target filename.
|
static DriverCommand |
DriverCommands.copyFile(java.lang.String fromFileName,
java.lang.String toFileName)
Copy the specified filename to the target filename.
|
static DriverCommand |
DDDriverFileCommands.copyFile(java.lang.String fromFileName,
java.lang.String toFileName)
Copy the specified filename to the target filename.
|
static DriverCommand |
DriverCommands.copyMatchingFiles(java.lang.String[] parameters)
Copy multiple files/sub-directories, based on matching the provided pattern, from one directory to another.
|
static DriverCommand |
DDDriverFileCommands.copyMatchingFiles(java.lang.String[] parameters)
Copy multiple files/sub-directories, based on matching the provided pattern, from one directory to another.
|
static DriverCommand |
DriverCommands.copyMatchingFiles(java.lang.String fromDirectoryName,
java.lang.String toDirectoryName,
java.lang.String pattern,
java.lang.String filterMode)
Copy multiple files/sub-directories, based on matching the provided pattern, from one directory to another.
|
static DriverCommand |
DDDriverFileCommands.copyMatchingFiles(java.lang.String fromDirectoryName,
java.lang.String toDirectoryName,
java.lang.String pattern,
java.lang.String filterMode)
Copy multiple files/sub-directories, based on matching the provided pattern, from one directory to another.
|
static DriverCommand |
DriverCommands.copyVariableValueEx(java.lang.String[] parameters)
Copy the value of a (dynamic) DDVariable to another.
|
static DriverCommand |
DDDriverCommands.copyVariableValueEx(java.lang.String[] parameters)
Copy the value of a (dynamic) DDVariable to another.
|
static DriverCommand |
DriverCommands.copyVariableValueEx(java.lang.String sourceVariable,
java.lang.String destinationVariable)
Copy the value of a (dynamic) DDVariable to another.
|
static DriverCommand |
DDDriverCommands.copyVariableValueEx(java.lang.String sourceVariable,
java.lang.String destinationVariable)
Copy the value of a (dynamic) DDVariable to another.
|
static DriverCommand |
DriverCommands.createDirectory(java.lang.String directoryName)
Create the directory for the provided directory pathname
|
static DriverCommand |
DDDriverFileCommands.createDirectory(java.lang.String directoryName)
Create the directory for the provided directory pathname
|
static DriverCommand |
DriverCommands.createFile(java.lang.String[] parameters)
Open a new file with the filename, mode and access provided.
|
static DriverCommand |
DDDriverFileCommands.createFile(java.lang.String[] parameters)
Open a new file with the filename, mode and access provided.
|
static DriverCommand |
DriverCommands.createFile(java.lang.String fileName,
java.lang.String mode,
java.lang.String access,
java.lang.String fileNumberVariable,
java.lang.String fileNumber)
Open a new file with the filename, mode and access provided.
|
static DriverCommand |
DDDriverFileCommands.createFile(java.lang.String fileName,
java.lang.String mode,
java.lang.String access,
java.lang.String fileNumberVariable,
java.lang.String fileNumber)
Open a new file with the filename, mode and access provided.
|
static DriverCommand |
DriverCommands.delay(java.lang.String timeout)
Delay for a specified number of milliseconds.
|
static DriverCommand |
DDDriverCommands.delay(java.lang.String timeout)
Delay for a specified number of milliseconds.
|
static DriverCommand |
DriverCommands.deleteCounter(java.lang.String[] parameters)
Delete any existing private counter with the provided counterID.
|
static DriverCommand |
DDDriverCounterCommands.deleteCounter(java.lang.String[] parameters)
Delete any existing private counter with the provided counterID.
|
static DriverCommand |
DriverCommands.deleteCounter(java.lang.String counterID,
java.lang.String description)
Delete any existing private counter with the provided counterID.
|
static DriverCommand |
DDDriverCounterCommands.deleteCounter(java.lang.String counterID,
java.lang.String description)
Delete any existing private counter with the provided counterID.
|
static DriverCommand |
DriverCommands.deleteDBTableRecords(java.lang.String[] parameters)
Deletes records in a database table
Deletes records in a database table.
|
static DriverCommand |
DDDriverDatabaseCommands.deleteDBTableRecords(java.lang.String[] parameters)
Deletes records in a database table
Deletes records in a database table.
|
static DriverCommand |
DriverCommands.deleteDBTableRecords(java.lang.String aDBAlias,
java.lang.String aTableAlias,
java.lang.String dBTableName,
java.lang.String dBQueryCond,
java.lang.String dBSourceName,
java.lang.String userID,
java.lang.String password,
java.lang.String sQLStatus)
Deletes records in a database table
Deletes records in a database table.
|
static DriverCommand |
DDDriverDatabaseCommands.deleteDBTableRecords(java.lang.String aDBAlias,
java.lang.String aTableAlias,
java.lang.String dBTableName,
java.lang.String dBQueryCond,
java.lang.String dBSourceName,
java.lang.String userID,
java.lang.String password,
java.lang.String sQLStatus)
Deletes records in a database table
Deletes records in a database table.
|
static DriverCommand |
DriverCommands.deleteDirectory(java.lang.String directoryName)
Delete the directory for the provided directory pathname
|
static DriverCommand |
DDDriverFileCommands.deleteDirectory(java.lang.String directoryName)
Delete the directory for the provided directory pathname
|
static DriverCommand |
DriverCommands.deleteDirectoryContents(java.lang.String[] parameters)
Delete the contents (files and sub-directories) of a provided directory and optionally,
the directory itself.
|
static DriverCommand |
DDDriverFileCommands.deleteDirectoryContents(java.lang.String[] parameters)
Delete the contents (files and sub-directories) of a provided directory and optionally,
the directory itself.
|
static DriverCommand |
DriverCommands.deleteDirectoryContents(java.lang.String directoryName,
java.lang.String deleteDir)
Delete the contents (files and sub-directories) of a provided directory and optionally,
the directory itself.
|
static DriverCommand |
DDDriverFileCommands.deleteDirectoryContents(java.lang.String directoryName,
java.lang.String deleteDir)
Delete the contents (files and sub-directories) of a provided directory and optionally,
the directory itself.
|
static DriverCommand |
DriverCommands.deleteFile(java.lang.String[] parameters)
Delete the file for the file name provided
|
static DriverCommand |
DDDriverFileCommands.deleteFile(java.lang.String[] parameters)
Delete the file for the file name provided
|
static DriverCommand |
DriverCommands.deleteFile(java.lang.String fileName,
java.lang.String noVerify)
Delete the file for the file name provided
|
static DriverCommand |
DDDriverFileCommands.deleteFile(java.lang.String fileName,
java.lang.String noVerify)
Delete the file for the file name provided
|
static DriverCommand |
DriverCommands.deleteNetworkConditions()
Delete network conditions.
|
static DriverCommand |
DDDriverCommands.deleteNetworkConditions()
Delete network conditions.
|
static DriverCommand |
DriverCommands.disableDomain(java.lang.String domain)
Disable a particular test domain for testing.
|
static DriverCommand |
DDDriverCommands.disableDomain(java.lang.String domain)
Disable a particular test domain for testing.
|
static DriverCommand |
DriverCommands.enableDomain(java.lang.String domain)
Enable a particular test domain for testing.
|
static DriverCommand |
DDDriverCommands.enableDomain(java.lang.String domain)
Enable a particular test domain for testing.
|
static DriverCommand |
DriverCommands.endRequirement(java.lang.String requirementID)
DEPRECATED.
|
static DriverCommand |
DDDriverDeprecatedCommands.endRequirement(java.lang.String requirementID)
DEPRECATED.
|
static DriverCommand |
DriverCommands.endTestcase(java.lang.String testCaseID)
DEPRECATED.
|
static DriverCommand |
DDDriverDeprecatedCommands.endTestcase(java.lang.String testCaseID)
DEPRECATED.
|
static DriverCommand |
DriverCommands.execSQLQuery(java.lang.String[] parameters)
Executes the query provided in a queryStr on the database table.
|
static DriverCommand |
DDDriverDatabaseCommands.execSQLQuery(java.lang.String[] parameters)
Executes the query provided in a queryStr on the database table.
|
static DriverCommand |
DriverCommands.execSQLQuery(java.lang.String aDBAlias,
java.lang.String aTableAlias,
java.lang.String dBSourceName,
java.lang.String queryStr,
java.lang.String sQLStatusCode,
java.lang.String userID,
java.lang.String password)
Executes the query provided in a queryStr on the database table.
|
static DriverCommand |
DDDriverDatabaseCommands.execSQLQuery(java.lang.String aDBAlias,
java.lang.String aTableAlias,
java.lang.String dBSourceName,
java.lang.String queryStr,
java.lang.String sQLStatusCode,
java.lang.String userID,
java.lang.String password)
Executes the query provided in a queryStr on the database table.
|
static DriverCommand |
DriverCommands.exitCycle()
Exit the currently running Step, Suite, and/or Cycle table.
|
static DriverCommand |
DDDriverFlowCommands.exitCycle()
Exit the currently running Step, Suite, and/or Cycle table.
|
static DriverCommand |
DriverCommands.exitSuite()
Exit the currently running Step and/or Suite table.
|
static DriverCommand |
DDDriverFlowCommands.exitSuite()
Exit the currently running Step and/or Suite table.
|
static DriverCommand |
DriverCommands.exitTable()
Exit the currently running Step, Suite, or Cycle table.
|
static DriverCommand |
DDDriverFlowCommands.exitTable()
Exit the currently running Step, Suite, or Cycle table.
|
static DriverCommand |
DriverCommands.expressions(java.lang.String mode)
Enable and Disable enhanced expressions.
|
static DriverCommand |
DDDriverCommands.expressions(java.lang.String mode)
Enable and Disable enhanced expressions.
|
static DriverCommand |
DriverCommands.filterImage(java.lang.String[] parameters)
Filter out specific parts of an image.
|
static DriverCommand |
DDDriverFileCommands.filterImage(java.lang.String[] parameters)
Filter out specific parts of an image.
|
static DriverCommand |
DriverCommands.filterImage(java.lang.String inputFilename,
java.lang.String outputFilename,
java.lang.String filterMode,
java.lang.String coords)
Filter out specific parts of an image.
|
static DriverCommand |
DDDriverFileCommands.filterImage(java.lang.String inputFilename,
java.lang.String outputFilename,
java.lang.String filterMode,
java.lang.String coords)
Filter out specific parts of an image.
|
static DriverCommand |
DriverCommands.filterTextFile(java.lang.String[] parameters)
Filter a text file based on the given parameters.
|
static DriverCommand |
DDDriverFileCommands.filterTextFile(java.lang.String[] parameters)
Filter a text file based on the given parameters.
|
static DriverCommand |
DriverCommands.filterTextFile(java.lang.String file,
java.lang.String filterMode,
java.lang.String filterOptions,
java.lang.String encoding)
Filter a text file based on the given parameters.
|
static DriverCommand |
DDDriverFileCommands.filterTextFile(java.lang.String file,
java.lang.String filterMode,
java.lang.String filterOptions,
java.lang.String encoding)
Filter a text file based on the given parameters.
|
static DriverCommand |
DriverCommands.findSqaFile(java.lang.String[] parameters)
Find the file for the SQA relative path and file name provided.
|
static DriverCommand |
DDDriverFileCommands.findSqaFile(java.lang.String[] parameters)
Find the file for the SQA relative path and file name provided.
|
static DriverCommand |
DriverCommands.findSqaFile(java.lang.String fileName,
java.lang.String filePathVariable)
Find the file for the SQA relative path and file name provided.
|
static DriverCommand |
DDDriverFileCommands.findSqaFile(java.lang.String fileName,
java.lang.String filePathVariable)
Find the file for the SQA relative path and file name provided.
|
static DriverCommand |
DriverCommands.getAppMapValue(java.lang.String[] parameters)
Assign a DDVariable a value from an App Map.
|
static DriverCommand |
DDDriverCommands.getAppMapValue(java.lang.String[] parameters)
Assign a DDVariable a value from an App Map.
|
static DriverCommand |
DriverCommands.getAppMapValue(java.lang.String appMapID,
java.lang.String section,
java.lang.String item,
java.lang.String varName)
Assign a DDVariable a value from an App Map.
|
static DriverCommand |
DDDriverCommands.getAppMapValue(java.lang.String appMapID,
java.lang.String section,
java.lang.String item,
java.lang.String varName)
Assign a DDVariable a value from an App Map.
|
static DriverCommand |
DriverCommands.getCompScreenResolution(java.lang.String[] parameters)
Gets the current computer screen resolution and returns x and y values.
|
static DriverCommand |
DDDriverCommands.getCompScreenResolution(java.lang.String[] parameters)
Gets the current computer screen resolution and returns x and y values.
|
static DriverCommand |
DriverCommands.getCompScreenResolution(java.lang.String xWidthVariable,
java.lang.String yHeightVariable)
Gets the current computer screen resolution and returns x and y values.
|
static DriverCommand |
DDDriverCommands.getCompScreenResolution(java.lang.String xWidthVariable,
java.lang.String yHeightVariable)
Gets the current computer screen resolution and returns x and y values.
|
static DriverCommand |
DriverCommands.getDBTableColumnCount(java.lang.String[] parameters)
Executes the query in a specified database table and returns the total column count.
|
static DriverCommand |
DDDriverDatabaseCommands.getDBTableColumnCount(java.lang.String[] parameters)
Executes the query in a specified database table and returns the total column count.
|
static DriverCommand |
DriverCommands.getDBTableColumnCount(java.lang.String aDBAlias,
java.lang.String aTableAlias,
java.lang.String dBSourceName,
java.lang.String dBTableName,
java.lang.String columnCount,
java.lang.String sQLStatusCode,
java.lang.String userID,
java.lang.String password)
Executes the query in a specified database table and returns the total column count.
|
static DriverCommand |
DDDriverDatabaseCommands.getDBTableColumnCount(java.lang.String aDBAlias,
java.lang.String aTableAlias,
java.lang.String dBSourceName,
java.lang.String dBTableName,
java.lang.String columnCount,
java.lang.String sQLStatusCode,
java.lang.String userID,
java.lang.String password)
Executes the query in a specified database table and returns the total column count.
|
static DriverCommand |
DriverCommands.getDBTableRowCount(java.lang.String[] parameters)
Executes the query in a database table.
|
static DriverCommand |
DDDriverDatabaseCommands.getDBTableRowCount(java.lang.String[] parameters)
Executes the query in a database table.
|
static DriverCommand |
DriverCommands.getDBTableRowCount(java.lang.String aDBAlias,
java.lang.String aTableAlias,
java.lang.String dBSourceName,
java.lang.String dBTableName,
java.lang.String rowCount,
java.lang.String sQLStatusCode,
java.lang.String userID,
java.lang.String password)
Executes the query in a database table.
|
static DriverCommand |
DDDriverDatabaseCommands.getDBTableRowCount(java.lang.String aDBAlias,
java.lang.String aTableAlias,
java.lang.String dBSourceName,
java.lang.String dBTableName,
java.lang.String rowCount,
java.lang.String sQLStatusCode,
java.lang.String userID,
java.lang.String password)
Executes the query in a database table.
|
static DriverCommand |
DriverCommands.getDBValue(java.lang.String[] parameters)
Executes the query and returns the case-sensitive value as result of the execution.
|
static DriverCommand |
DDDriverDatabaseCommands.getDBValue(java.lang.String[] parameters)
Executes the query and returns the case-sensitive value as result of the execution.
|
static DriverCommand |
DriverCommands.getDBValue(java.lang.String aDBAlias,
java.lang.String aTableAlias,
java.lang.String dBSourceName,
java.lang.String queryStr,
java.lang.String queryResult,
java.lang.String sQLStatusCode,
java.lang.String userID,
java.lang.String password)
Executes the query and returns the case-sensitive value as result of the execution.
|
static DriverCommand |
DDDriverDatabaseCommands.getDBValue(java.lang.String aDBAlias,
java.lang.String aTableAlias,
java.lang.String dBSourceName,
java.lang.String queryStr,
java.lang.String queryResult,
java.lang.String sQLStatusCode,
java.lang.String userID,
java.lang.String password)
Executes the query and returns the case-sensitive value as result of the execution.
|
static DriverCommand |
DriverCommands.getDeltaDate(java.lang.String[] parameters)
Calculates the delta date positive or negative delta days from the supplied date
Calculates the delta date positive or negative delta days from the supplied date.
|
static DriverCommand |
DDDriverCommands.getDeltaDate(java.lang.String[] parameters)
Calculates the delta date positive or negative delta days from the supplied date
Calculates the delta date positive or negative delta days from the supplied date.
|
static DriverCommand |
DriverCommands.getDeltaDate(java.lang.String sourceDateString,
java.lang.String deltaDays,
java.lang.String resultString)
Calculates the delta date positive or negative delta days from the supplied date
Calculates the delta date positive or negative delta days from the supplied date.
|
static DriverCommand |
DDDriverCommands.getDeltaDate(java.lang.String sourceDateString,
java.lang.String deltaDays,
java.lang.String resultString)
Calculates the delta date positive or negative delta days from the supplied date
Calculates the delta date positive or negative delta days from the supplied date.
|
static DriverCommand |
DriverCommands.getField(java.lang.String[] parameters)
GetField, get a field out of a string using specified delimiter(s).
|
static DriverCommand |
DDDriverStringCommands.getField(java.lang.String[] parameters)
GetField, get a field out of a string using specified delimiter(s).
|
static DriverCommand |
DriverCommands.getField(java.lang.String inputString,
java.lang.String index,
java.lang.String delimiter,
java.lang.String resultVar)
GetField, get a field out of a string using specified delimiter(s).
|
static DriverCommand |
DDDriverStringCommands.getField(java.lang.String inputString,
java.lang.String index,
java.lang.String delimiter,
java.lang.String resultVar)
GetField, get a field out of a string using specified delimiter(s).
|
static DriverCommand |
DriverCommands.getFieldCount(java.lang.String[] parameters)
GetFieldCount, Finds the count of all fields within the
inputRecord found from startindex to the end of the inputRecord.
|
static DriverCommand |
DDDriverStringCommands.getFieldCount(java.lang.String[] parameters)
GetFieldCount, Finds the count of all fields within the
inputRecord found from startindex to the end of the inputRecord.
|
static DriverCommand |
DriverCommands.getFieldCount(java.lang.String string1,
java.lang.String startindex,
java.lang.String delimiters,
java.lang.String resultVar)
GetFieldCount, Finds the count of all fields within the
inputRecord found from startindex to the end of the inputRecord.
|
static DriverCommand |
DDDriverStringCommands.getFieldCount(java.lang.String string1,
java.lang.String startindex,
java.lang.String delimiters,
java.lang.String resultVar)
GetFieldCount, Finds the count of all fields within the
inputRecord found from startindex to the end of the inputRecord.
|
static DriverCommand |
DriverCommands.getFileDateTime(java.lang.String[] parameters)
Determine the date and time the file created/last changed/last accessed for file name provided and assign it to a DDV variable.
|
static DriverCommand |
DDDriverFileCommands.getFileDateTime(java.lang.String[] parameters)
Determine the date and time the file created/last changed/last accessed for file name provided and assign it to a DDV variable.
|
static DriverCommand |
DriverCommands.getFileDateTime(java.lang.String fileName,
java.lang.String fileDateVariable,
java.lang.String getMilitaryTime,
java.lang.String dateTimeType)
Determine the date and time the file created/last changed/last accessed for file name provided and assign it to a DDV variable.
|
static DriverCommand |
DDDriverFileCommands.getFileDateTime(java.lang.String fileName,
java.lang.String fileDateVariable,
java.lang.String getMilitaryTime,
java.lang.String dateTimeType)
Determine the date and time the file created/last changed/last accessed for file name provided and assign it to a DDV variable.
|
static DriverCommand |
DriverCommands.getFileProtections(java.lang.String[] parameters)
Save the file attributes for the file name to the variable provided.
|
static DriverCommand |
DDDriverFileCommands.getFileProtections(java.lang.String[] parameters)
Save the file attributes for the file name to the variable provided.
|
static DriverCommand |
DriverCommands.getFileProtections(java.lang.String fileName,
java.lang.String varName)
Save the file attributes for the file name to the variable provided.
|
static DriverCommand |
DDDriverFileCommands.getFileProtections(java.lang.String fileName,
java.lang.String varName)
Save the file attributes for the file name to the variable provided.
|
static DriverCommand |
DriverCommands.getFiles(java.lang.String[] parameters)
Search the directory provided for files according to possible attribute and write the list of filenames found into the output file.
|
static DriverCommand |
DDDriverFileCommands.getFiles(java.lang.String[] parameters)
Search the directory provided for files according to possible attribute and write the list of filenames found into the output file.
|
static DriverCommand |
DriverCommands.getFiles(java.lang.String directory,
java.lang.String fileName,
java.lang.String fileAttributes)
Search the directory provided for files according to possible attribute and write the list of filenames found into the output file.
|
static DriverCommand |
DDDriverFileCommands.getFiles(java.lang.String directory,
java.lang.String fileName,
java.lang.String fileAttributes)
Search the directory provided for files according to possible attribute and write the list of filenames found into the output file.
|
static DriverCommand |
DriverCommands.getFileSize(java.lang.String[] parameters)
Determine the file size for file name provided and assign it to a DDV variable.
|
static DriverCommand |
DDDriverFileCommands.getFileSize(java.lang.String[] parameters)
Determine the file size for file name provided and assign it to a DDV variable.
|
static DriverCommand |
DriverCommands.getFileSize(java.lang.String fileName,
java.lang.String fileSizeVariable)
Determine the file size for file name provided and assign it to a DDV variable.
|
static DriverCommand |
DDDriverFileCommands.getFileSize(java.lang.String fileName,
java.lang.String fileSizeVariable)
Determine the file size for file name provided and assign it to a DDV variable.
|
static DriverCommand |
DriverCommands.getFixedWidthField(java.lang.String[] parameters)
GetFixedWidthField, Given an Input of fixed-width
fields, return the nth(FieldID) Field in the record.
|
static DriverCommand |
DDDriverStringCommands.getFixedWidthField(java.lang.String[] parameters)
GetFixedWidthField, Given an Input of fixed-width
fields, return the nth(FieldID) Field in the record.
|
static DriverCommand |
DriverCommands.getFixedWidthField(java.lang.String sourceString,
java.lang.String fieldID,
java.lang.String fixedwidth,
java.lang.String resultVar)
GetFixedWidthField, Given an Input of fixed-width
fields, return the nth(FieldID) Field in the record.
|
static DriverCommand |
DDDriverStringCommands.getFixedWidthField(java.lang.String sourceString,
java.lang.String fieldID,
java.lang.String fixedwidth,
java.lang.String resultVar)
GetFixedWidthField, Given an Input of fixed-width
fields, return the nth(FieldID) Field in the record.
|
static DriverCommand |
DriverCommands.getINIFileValue(java.lang.String[] parameters)
Get value from INI file.
|
static DriverCommand |
DDDriverFileCommands.getINIFileValue(java.lang.String[] parameters)
Get value from INI file.
|
static DriverCommand |
DriverCommands.getINIFileValue(java.lang.String fileName,
java.lang.String section,
java.lang.String item,
java.lang.String variable)
Get value from INI file.
|
static DriverCommand |
DDDriverFileCommands.getINIFileValue(java.lang.String fileName,
java.lang.String section,
java.lang.String item,
java.lang.String variable)
Get value from INI file.
|
static DriverCommand |
DriverCommands.getMillisBetweenRecords(java.lang.String variableName)
Get the pause between two records, and assigns the value to a DDVariable.
|
static DriverCommand |
DDDriverCommands.getMillisBetweenRecords(java.lang.String variableName)
Get the pause between two records, and assigns the value to a DDVariable.
|
static DriverCommand |
DriverCommands.getMultiDelimitedField(java.lang.String[] parameters)
Given a sourceString of delimited fields, return the nth(FieldID) Field
in the record from startIndex.
|
static DriverCommand |
DDDriverStringCommands.getMultiDelimitedField(java.lang.String[] parameters)
Given a sourceString of delimited fields, return the nth(FieldID) Field
in the record from startIndex.
|
static DriverCommand |
DriverCommands.getMultiDelimitedField(java.lang.String sourceString,
java.lang.String fieldID,
java.lang.String startIndex,
java.lang.String delimiters,
java.lang.String resultVar)
Given a sourceString of delimited fields, return the nth(FieldID) Field
in the record from startIndex.
|
static DriverCommand |
DDDriverStringCommands.getMultiDelimitedField(java.lang.String sourceString,
java.lang.String fieldID,
java.lang.String startIndex,
java.lang.String delimiters,
java.lang.String resultVar)
Given a sourceString of delimited fields, return the nth(FieldID) Field
in the record from startIndex.
|
static DriverCommand |
DriverCommands.getMultiDelimitedFieldCount(java.lang.String[] parameters)
Finds the count of all fields within the inputRecord found from
startindex to the end of the inputRecord.
|
static DriverCommand |
DDDriverStringCommands.getMultiDelimitedFieldCount(java.lang.String[] parameters)
Finds the count of all fields within the inputRecord found from
startindex to the end of the inputRecord.
|
static DriverCommand |
DriverCommands.getMultiDelimitedFieldCount(java.lang.String string1,
java.lang.String startIndex,
java.lang.String delimiters,
java.lang.String resultVar)
Finds the count of all fields within the inputRecord found from
startindex to the end of the inputRecord.
|
static DriverCommand |
DDDriverStringCommands.getMultiDelimitedFieldCount(java.lang.String string1,
java.lang.String startIndex,
java.lang.String delimiters,
java.lang.String resultVar)
Finds the count of all fields within the inputRecord found from
startindex to the end of the inputRecord.
|
static DriverCommand |
DriverCommands.getNetworkConditions(java.lang.String networkConditionsVar)
Get network conditions.
|
static DriverCommand |
DDDriverCommands.getNetworkConditions(java.lang.String networkConditionsVar)
Get network conditions.
|
static DriverCommand |
DriverCommands.getNextDelimiterIndex(java.lang.String[] parameters)
GetNextDelimiterIndex, Finds the index of the first
character matching one of the provided delimiter characters.
|
static DriverCommand |
DDDriverStringCommands.getNextDelimiterIndex(java.lang.String[] parameters)
GetNextDelimiterIndex, Finds the index of the first
character matching one of the provided delimiter characters.
|
static DriverCommand |
DriverCommands.getNextDelimiterIndex(java.lang.String string1,
java.lang.String startindex,
java.lang.String delimiters,
java.lang.String resultVar)
GetNextDelimiterIndex, Finds the index of the first
character matching one of the provided delimiter characters.
|
static DriverCommand |
DDDriverStringCommands.getNextDelimiterIndex(java.lang.String string1,
java.lang.String startindex,
java.lang.String delimiters,
java.lang.String resultVar)
GetNextDelimiterIndex, Finds the index of the first
character matching one of the provided delimiter characters.
|
static DriverCommand |
DriverCommands.getREDelimitedField(java.lang.String[] parameters)
GetREDelimitedField, this command returns the requested field contained in the input string using the passed in regular expression as the delimiter(s).
|
static DriverCommand |
DDDriverStringCommands.getREDelimitedField(java.lang.String[] parameters)
GetREDelimitedField, this command returns the requested field contained in the input string using the passed in regular expression as the delimiter(s).
|
static DriverCommand |
DriverCommands.getREDelimitedField(java.lang.String inputString,
java.lang.String index,
java.lang.String regExp,
java.lang.String resultVar)
GetREDelimitedField, this command returns the requested field contained in the input string using the passed in regular expression as the delimiter(s).
|
static DriverCommand |
DDDriverStringCommands.getREDelimitedField(java.lang.String inputString,
java.lang.String index,
java.lang.String regExp,
java.lang.String resultVar)
GetREDelimitedField, this command returns the requested field contained in the input string using the passed in regular expression as the delimiter(s).
|
static DriverCommand |
DriverCommands.getREDelimitedFieldCount(java.lang.String[] parameters)
GetREDelimitedFieldCount, this command returns the number of fields contained in the input string using the passed in regular expression as the delimiter(s).
|
static DriverCommand |
DDDriverStringCommands.getREDelimitedFieldCount(java.lang.String[] parameters)
GetREDelimitedFieldCount, this command returns the number of fields contained in the input string using the passed in regular expression as the delimiter(s).
|
static DriverCommand |
DriverCommands.getREDelimitedFieldCount(java.lang.String inputString,
java.lang.String index,
java.lang.String regExp,
java.lang.String resultVar)
GetREDelimitedFieldCount, this command returns the number of fields contained in the input string using the passed in regular expression as the delimiter(s).
|
static DriverCommand |
DDDriverStringCommands.getREDelimitedFieldCount(java.lang.String inputString,
java.lang.String index,
java.lang.String regExp,
java.lang.String resultVar)
GetREDelimitedFieldCount, this command returns the number of fields contained in the input string using the passed in regular expression as the delimiter(s).
|
static DriverCommand |
DriverCommands.getRegistryKeyValue(java.lang.String[] parameters)
Assign the value of the specified Registry Key to a variable.
|
static DriverCommand |
DDDriverCommands.getRegistryKeyValue(java.lang.String[] parameters)
Assign the value of the specified Registry Key to a variable.
|
static DriverCommand |
DriverCommands.getRegistryKeyValue(java.lang.String key,
java.lang.String keyValue,
java.lang.String varName)
Assign the value of the specified Registry Key to a variable.
|
static DriverCommand |
DDDriverCommands.getRegistryKeyValue(java.lang.String key,
java.lang.String keyValue,
java.lang.String varName)
Assign the value of the specified Registry Key to a variable.
|
static DriverCommand |
DriverCommands.getSecsAfterWindowActive(java.lang.String variableName)
Get the delay after window is activated, and assigns the value to a DDVariable.
|
static DriverCommand |
DDDriverCommands.getSecsAfterWindowActive(java.lang.String variableName)
Get the delay after window is activated, and assigns the value to a DDVariable.
|
static DriverCommand |
DriverCommands.getSecsBeforeMouseDown(java.lang.String variableName)
Get the delay before mouse down, and assigns the value to a DDVariable.
|
static DriverCommand |
DDDriverCommands.getSecsBeforeMouseDown(java.lang.String variableName)
Get the delay before mouse down, and assigns the value to a DDVariable.
|
static DriverCommand |
DriverCommands.getSecsBeforeMouseUp(java.lang.String variableName)
Get the delay before mouse up, and assigns the value to a DDVariable.
|
static DriverCommand |
DDDriverCommands.getSecsBeforeMouseUp(java.lang.String variableName)
Get the delay before mouse up, and assigns the value to a DDVariable.
|
static DriverCommand |
DriverCommands.getSecsDelayRetryComponent(java.lang.String variableName)
Get the delay of re-finding object, and assigns the value to a DDVariable.
|
static DriverCommand |
DDDriverCommands.getSecsDelayRetryComponent(java.lang.String variableName)
Get the delay of re-finding object, and assigns the value to a DDVariable.
|
static DriverCommand |
DriverCommands.getSecsSeekComponent(java.lang.String variableName)
Get the timeout of finding object, and assigns the value to a DDVariable.
|
static DriverCommand |
DDDriverCommands.getSecsSeekComponent(java.lang.String variableName)
Get the timeout of finding object, and assigns the value to a DDVariable.
|
static DriverCommand |
DriverCommands.getStringCountInFile(java.lang.String[] parameters)
Count the number of occurrences of a target string in a File.
|
static DriverCommand |
DDDriverFileCommands.getStringCountInFile(java.lang.String[] parameters)
Count the number of occurrences of a target string in a File.
|
static DriverCommand |
DriverCommands.getStringCountInFile(java.lang.String file,
java.lang.String string,
java.lang.String varName,
java.lang.String caseSensitive,
java.lang.String encoding)
Count the number of occurrences of a target string in a File.
|
static DriverCommand |
DDDriverFileCommands.getStringCountInFile(java.lang.String file,
java.lang.String string,
java.lang.String varName,
java.lang.String caseSensitive,
java.lang.String encoding)
Count the number of occurrences of a target string in a File.
|
static DriverCommand |
DriverCommands.getSubstringsInFile(java.lang.String[] parameters)
Extract dynamic substrings from a file using regular expressions.
|
static DriverCommand |
DDDriverFileCommands.getSubstringsInFile(java.lang.String[] parameters)
Extract dynamic substrings from a file using regular expressions.
|
static DriverCommand |
DriverCommands.getSubstringsInFile(java.lang.String file,
java.lang.String regexstart,
java.lang.String regexstop,
java.lang.String rootname)
Extract dynamic substrings from a file using regular expressions.
|
static DriverCommand |
DDDriverFileCommands.getSubstringsInFile(java.lang.String file,
java.lang.String regexstart,
java.lang.String regexstop,
java.lang.String rootname)
Extract dynamic substrings from a file using regular expressions.
|
static DriverCommand |
DriverCommands.getSubstringsInString(java.lang.String[] parameters)
Extract dynamic substring from a string using regular expressions.
|
static DriverCommand |
DDDriverStringCommands.getSubstringsInString(java.lang.String[] parameters)
Extract dynamic substring from a string using regular expressions.
|
static DriverCommand |
DriverCommands.getSubstringsInString(java.lang.String string,
java.lang.String regexStart,
java.lang.String regexStop,
java.lang.String varName)
Extract dynamic substring from a string using regular expressions.
|
static DriverCommand |
DDDriverStringCommands.getSubstringsInString(java.lang.String string,
java.lang.String regexStart,
java.lang.String regexStop,
java.lang.String varName)
Extract dynamic substring from a string using regular expressions.
|
static DriverCommand |
DriverCommands.getSystemDate(java.lang.String variableName)
Assigns the string value of the system date to a DDVariable.
|
static DriverCommand |
DDDriverCommands.getSystemDate(java.lang.String variableName)
Assigns the string value of the system date to a DDVariable.
|
static DriverCommand |
DriverCommands.getSystemDateTime(java.lang.String[] parameters)
Assigns the string value of the system datetime to a DDVariable.
|
static DriverCommand |
DDDriverCommands.getSystemDateTime(java.lang.String[] parameters)
Assigns the string value of the system datetime to a DDVariable.
|
static DriverCommand |
DriverCommands.getSystemDateTime(java.lang.String variableName,
java.lang.String getMilitaryTime)
Assigns the string value of the system datetime to a DDVariable.
|
static DriverCommand |
DDDriverCommands.getSystemDateTime(java.lang.String variableName,
java.lang.String getMilitaryTime)
Assigns the string value of the system datetime to a DDVariable.
|
static DriverCommand |
DriverCommands.getSystemEnviron(java.lang.String[] parameters)
GetSystemEnviron, get a system environment variable value
|
static DriverCommand |
DDDriverStringCommands.getSystemEnviron(java.lang.String[] parameters)
GetSystemEnviron, get a system environment variable value
|
static DriverCommand |
DriverCommands.getSystemEnviron(java.lang.String string1,
java.lang.String resultVar)
GetSystemEnviron, get a system environment variable value
|
static DriverCommand |
DDDriverStringCommands.getSystemEnviron(java.lang.String string1,
java.lang.String resultVar)
GetSystemEnviron, get a system environment variable value
|
static DriverCommand |
DriverCommands.getSystemTime(java.lang.String[] parameters)
Assigns the string value of the current system time to a DDVariable.
|
static DriverCommand |
DDDriverCommands.getSystemTime(java.lang.String[] parameters)
Assigns the string value of the current system time to a DDVariable.
|
static DriverCommand |
DriverCommands.getSystemTime(java.lang.String variableName,
java.lang.String getMilitaryTime)
Assigns the string value of the current system time to a DDVariable.
|
static DriverCommand |
DDDriverCommands.getSystemTime(java.lang.String variableName,
java.lang.String getMilitaryTime)
Assigns the string value of the current system time to a DDVariable.
|
static DriverCommand |
DriverCommands.getSystemUser(java.lang.String resultVar)
Get the USERID of the currently logged on user as stored in System Environment variables.
|
static DriverCommand |
DDDriverStringCommands.getSystemUser(java.lang.String resultVar)
Get the USERID of the currently logged on user as stored in System Environment variables.
|
static DriverCommand |
DriverCommands.getTextFromImage(java.lang.String[] parameters)
Incorporate OCR technology to detect the text in an image file and save the text to a variable.
|
static DriverCommand |
DDDriverFileCommands.getTextFromImage(java.lang.String[] parameters)
Incorporate OCR technology to detect the text in an image file and save the text to a variable.
|
static DriverCommand |
DriverCommands.getTextFromImage(java.lang.String imageFile,
java.lang.String variableName,
java.lang.String oCRId,
java.lang.String langId,
java.lang.String scaleRatio)
Incorporate OCR technology to detect the text in an image file and save the text to a variable.
|
static DriverCommand |
DDDriverFileCommands.getTextFromImage(java.lang.String imageFile,
java.lang.String variableName,
java.lang.String oCRId,
java.lang.String langId,
java.lang.String scaleRatio)
Incorporate OCR technology to detect the text in an image file and save the text to a variable.
|
static DriverCommand |
DriverCommands.getTrimmedField(java.lang.String[] parameters)
GetTrimmedField, get a trimmed field out of a string using specified delimiter(s).
|
static DriverCommand |
DDDriverStringCommands.getTrimmedField(java.lang.String[] parameters)
GetTrimmedField, get a trimmed field out of a string using specified delimiter(s).
|
static DriverCommand |
DriverCommands.getTrimmedField(java.lang.String string1,
java.lang.String index,
java.lang.String delimiter,
java.lang.String resultVar)
GetTrimmedField, get a trimmed field out of a string using specified delimiter(s).
|
static DriverCommand |
DDDriverStringCommands.getTrimmedField(java.lang.String string1,
java.lang.String index,
java.lang.String delimiter,
java.lang.String resultVar)
GetTrimmedField, get a trimmed field out of a string using specified delimiter(s).
|
static DriverCommand |
DriverCommands.getURL(java.lang.String[] parameters)
Send an HTTP GET request, and get the response.
|
static DriverCommand |
DDDriverCommands.getURL(java.lang.String[] parameters)
Send an HTTP GET request, and get the response.
|
static DriverCommand |
DriverCommands.getURL(java.lang.String uRL,
java.lang.String variable,
java.lang.String timeout,
java.lang.String headerName,
java.lang.String headerValue)
Send an HTTP GET request, and get the response.
|
static DriverCommand |
DDDriverCommands.getURL(java.lang.String uRL,
java.lang.String variable,
java.lang.String timeout,
java.lang.String headerName,
java.lang.String headerValue)
Send an HTTP GET request, and get the response.
|
static DriverCommand |
DriverCommands.getVariableValueEx(java.lang.String[] parameters)
Replaced by CopyVariableValueEx
|
static DriverCommand |
DDDriverDeprecatedCommands.getVariableValueEx(java.lang.String[] parameters)
Replaced by CopyVariableValueEx
|
static DriverCommand |
DriverCommands.getVariableValueEx(java.lang.String sourceVariable,
java.lang.String destinationVariable)
Replaced by CopyVariableValueEx
|
static DriverCommand |
DDDriverDeprecatedCommands.getVariableValueEx(java.lang.String sourceVariable,
java.lang.String destinationVariable)
Replaced by CopyVariableValueEx
|
static DriverCommand |
DriverCommands.getVersion(java.lang.String variable)
Get the engine VERSION
Used to specify the VERSION of the engine.
|
static DriverCommand |
DDDriverCommands.getVersion(java.lang.String variable)
Get the engine VERSION
Used to specify the VERSION of the engine.
|
static DriverCommand |
DriverCommands.gotoBlockID(java.lang.String blockID)
Goto a named block in the current table.
|
static DriverCommand |
DDDriverFlowCommands.gotoBlockID(java.lang.String blockID)
Goto a named block in the current table.
|
static DriverCommand |
DriverCommands.hideSoftKeyboard()
Hide the soft keyboard.
|
static DriverCommand |
DDDriverCommands.hideSoftKeyboard()
Hide the soft keyboard.
|
static DriverCommand |
DriverCommands.highLight(java.lang.String mode)
Turn on or off the component highlight functionality.
|
static DriverCommand |
DDDriverCommands.highLight(java.lang.String mode)
Turn on or off the component highlight functionality.
|
static DriverCommand |
DriverCommands.ifExistDir(java.lang.String[] parameters)
If the specified directory exists, then execute the following driver command.
|
static DriverCommand |
DDDriverFileCommands.ifExistDir(java.lang.String[] parameters)
If the specified directory exists, then execute the following driver command.
|
static DriverCommand |
DriverCommands.ifExistDir(java.lang.String directoryName,
java.lang.String thenDriverCommand)
If the specified directory exists, then execute the following driver command.
|
static DriverCommand |
DDDriverFileCommands.ifExistDir(java.lang.String directoryName,
java.lang.String thenDriverCommand)
If the specified directory exists, then execute the following driver command.
|
static DriverCommand |
DriverCommands.ifExistFile(java.lang.String[] parameters)
If the specified file exists, then execute the following driver command.
|
static DriverCommand |
DDDriverFileCommands.ifExistFile(java.lang.String[] parameters)
If the specified file exists, then execute the following driver command.
|
static DriverCommand |
DriverCommands.ifExistFile(java.lang.String fileName,
java.lang.String thenDriverCommand)
If the specified file exists, then execute the following driver command.
|
static DriverCommand |
DDDriverFileCommands.ifExistFile(java.lang.String fileName,
java.lang.String thenDriverCommand)
If the specified file exists, then execute the following driver command.
|
static DriverCommand |
DriverCommands.index(java.lang.String[] parameters)
Returns the position of the first occurrence of one string
within another string.
|
static DriverCommand |
DDDriverStringCommands.index(java.lang.String[] parameters)
Returns the position of the first occurrence of one string
within another string.
|
static DriverCommand |
DriverCommands.index(java.lang.String start,
java.lang.String sourceString,
java.lang.String findString,
java.lang.String resultVar)
Returns the position of the first occurrence of one string
within another string.
|
static DriverCommand |
DDDriverStringCommands.index(java.lang.String start,
java.lang.String sourceString,
java.lang.String findString,
java.lang.String resultVar)
Returns the position of the first occurrence of one string
within another string.
|
static DriverCommand |
DriverCommands.isEndOfFile(java.lang.String[] parameters)
If the specified file is at the end of file, a 'variable' gets true assigned, otherwise it gets false
|
static DriverCommand |
DDDriverFileCommands.isEndOfFile(java.lang.String[] parameters)
If the specified file is at the end of file, a 'variable' gets true assigned, otherwise it gets false
|
static DriverCommand |
DriverCommands.isEndOfFile(java.lang.String fileNumber,
java.lang.String variable)
If the specified file is at the end of file, a 'variable' gets true assigned, otherwise it gets false
|
static DriverCommand |
DDDriverFileCommands.isEndOfFile(java.lang.String fileNumber,
java.lang.String variable)
If the specified file is at the end of file, a 'variable' gets true assigned, otherwise it gets false
|
static DriverCommand |
DriverCommands.launchApplication(java.lang.String[] parameters)
Identify and Launch a specified application
For IOS: This command is used to Launch the IOS Instruments testing tool.
|
static DriverCommand |
DDDriverCommands.launchApplication(java.lang.String[] parameters)
Identify and Launch a specified application
For IOS: This command is used to Launch the IOS Instruments testing tool.
|
static DriverCommand |
DriverCommands.launchApplication(java.lang.String applicationID,
java.lang.String executablePath,
java.lang.String workDir,
java.lang.String cMDLineParam,
java.lang.String appMap)
Identify and Launch a specified application
For IOS: This command is used to Launch the IOS Instruments testing tool.
|
static DriverCommand |
DDDriverCommands.launchApplication(java.lang.String applicationID,
java.lang.String executablePath,
java.lang.String workDir,
java.lang.String cMDLineParam,
java.lang.String appMap)
Identify and Launch a specified application
For IOS: This command is used to Launch the IOS Instruments testing tool.
|
static DriverCommand |
DriverCommands.left(java.lang.String[] parameters)
Returns a string of a specified number of characters copied from the beginning of another string.
|
static DriverCommand |
DDDriverStringCommands.left(java.lang.String[] parameters)
Returns a string of a specified number of characters copied from the beginning of another string.
|
static DriverCommand |
DriverCommands.left(java.lang.String sourceString,
java.lang.String length,
java.lang.String resultVar)
Returns a string of a specified number of characters copied from the beginning of another string.
|
static DriverCommand |
DDDriverStringCommands.left(java.lang.String sourceString,
java.lang.String length,
java.lang.String resultVar)
Returns a string of a specified number of characters copied from the beginning of another string.
|
static DriverCommand |
DriverCommands.leftTrim(java.lang.String[] parameters)
A new string trimmed of leading tabs and spaces.
|
static DriverCommand |
DDDriverStringCommands.leftTrim(java.lang.String[] parameters)
A new string trimmed of leading tabs and spaces.
|
static DriverCommand |
DriverCommands.leftTrim(java.lang.String sourceString,
java.lang.String resultVar)
A new string trimmed of leading tabs and spaces.
|
static DriverCommand |
DDDriverStringCommands.leftTrim(java.lang.String sourceString,
java.lang.String resultVar)
A new string trimmed of leading tabs and spaces.
|
static DriverCommand |
DriverCommands.length(java.lang.String[] parameters)
Returns the length of a string or variable.
|
static DriverCommand |
DDDriverStringCommands.length(java.lang.String[] parameters)
Returns the length of a string or variable.
|
static DriverCommand |
DriverCommands.length(java.lang.String sourceString,
java.lang.String resultVar)
Returns the length of a string or variable.
|
static DriverCommand |
DDDriverStringCommands.length(java.lang.String sourceString,
java.lang.String resultVar)
Returns the length of a string or variable.
|
static DriverCommand |
DriverCommands.logCounterInfo(java.lang.String[] parameters)
Log the specified counter's info in the active log(s) of the current Log Facility.
|
static DriverCommand |
DDDriverCounterCommands.logCounterInfo(java.lang.String[] parameters)
Log the specified counter's info in the active log(s) of the current Log Facility.
|
static DriverCommand |
DriverCommands.logCounterInfo(java.lang.String counterID,
java.lang.String logName)
Log the specified counter's info in the active log(s) of the current Log Facility.
|
static DriverCommand |
DDDriverCounterCommands.logCounterInfo(java.lang.String counterID,
java.lang.String logName)
Log the specified counter's info in the active log(s) of the current Log Facility.
|
static DriverCommand |
DriverCommands.logFailureOK(java.lang.String[] parameters)
Log an EXPECTED failure message.
|
static DriverCommand |
DDDriverLogCommands.logFailureOK(java.lang.String[] parameters)
Log an EXPECTED failure message.
|
static DriverCommand |
DriverCommands.logFailureOK(java.lang.String message,
java.lang.String details)
Log an EXPECTED failure message.
|
static DriverCommand |
DDDriverLogCommands.logFailureOK(java.lang.String message,
java.lang.String details)
Log an EXPECTED failure message.
|
static DriverCommand |
DriverCommands.logMessage(java.lang.String[] parameters)
Log a generic message
Log a generic message.
|
static DriverCommand |
DDDriverLogCommands.logMessage(java.lang.String[] parameters)
Log a generic message
Log a generic message.
|
static DriverCommand |
DriverCommands.logMessage(java.lang.String message,
java.lang.String details)
Log a generic message
Log a generic message.
|
static DriverCommand |
DDDriverLogCommands.logMessage(java.lang.String message,
java.lang.String details)
Log a generic message
Log a generic message.
|
static DriverCommand |
DriverCommands.logTestFailure(java.lang.String[] parameters)
Log a FAILURE message.
|
static DriverCommand |
DDDriverLogCommands.logTestFailure(java.lang.String[] parameters)
Log a FAILURE message.
|
static DriverCommand |
DriverCommands.logTestFailure(java.lang.String message,
java.lang.String details)
Log a FAILURE message.
|
static DriverCommand |
DDDriverLogCommands.logTestFailure(java.lang.String message,
java.lang.String details)
Log a FAILURE message.
|
static DriverCommand |
DriverCommands.logTestSuccess(java.lang.String[] parameters)
Log a SUCCESS/OK message.
|
static DriverCommand |
DDDriverLogCommands.logTestSuccess(java.lang.String[] parameters)
Log a SUCCESS/OK message.
|
static DriverCommand |
DriverCommands.logTestSuccess(java.lang.String message,
java.lang.String details)
Log a SUCCESS/OK message.
|
static DriverCommand |
DDDriverLogCommands.logTestSuccess(java.lang.String message,
java.lang.String details)
Log a SUCCESS/OK message.
|
static DriverCommand |
DriverCommands.logTestWarning(java.lang.String[] parameters)
Log a WARNING message.
|
static DriverCommand |
DDDriverLogCommands.logTestWarning(java.lang.String[] parameters)
Log a WARNING message.
|
static DriverCommand |
DriverCommands.logTestWarning(java.lang.String message,
java.lang.String details)
Log a WARNING message.
|
static DriverCommand |
DDDriverLogCommands.logTestWarning(java.lang.String message,
java.lang.String details)
Log a WARNING message.
|
static DriverCommand |
DriverCommands.logWarningOK(java.lang.String[] parameters)
Log an EXPECTED WARNING message.
|
static DriverCommand |
DDDriverLogCommands.logWarningOK(java.lang.String[] parameters)
Log an EXPECTED WARNING message.
|
static DriverCommand |
DriverCommands.logWarningOK(java.lang.String message,
java.lang.String details)
Log an EXPECTED WARNING message.
|
static DriverCommand |
DDDriverLogCommands.logWarningOK(java.lang.String message,
java.lang.String details)
Log an EXPECTED WARNING message.
|
static DriverCommand |
DriverCommands.notifyAndWait(java.lang.String[] parameters)
Display a user-defined message dialog and wait until dismissed.
|
static DriverCommand |
DDDriverCommands.notifyAndWait(java.lang.String[] parameters)
Display a user-defined message dialog and wait until dismissed.
|
static DriverCommand |
DriverCommands.notifyAndWait(java.lang.String message,
java.lang.String title)
Display a user-defined message dialog and wait until dismissed.
|
static DriverCommand |
DDDriverCommands.notifyAndWait(java.lang.String message,
java.lang.String title)
Display a user-defined message dialog and wait until dismissed.
|
static DriverCommand |
DriverCommands.onContainsGotoBlockID(java.lang.String[] parameters)
Goto the named block in the current table if value2 is contained within value1.
|
static DriverCommand |
DDDriverFlowCommands.onContainsGotoBlockID(java.lang.String[] parameters)
Goto the named block in the current table if value2 is contained within value1.
|
static DriverCommand |
DriverCommands.onContainsGotoBlockID(java.lang.String blockID,
java.lang.String value1,
java.lang.String value2,
java.lang.String caseSensitive)
Goto the named block in the current table if value2 is contained within value1.
|
static DriverCommand |
DDDriverFlowCommands.onContainsGotoBlockID(java.lang.String blockID,
java.lang.String value1,
java.lang.String value2,
java.lang.String caseSensitive)
Goto the named block in the current table if value2 is contained within value1.
|
static DriverCommand |
DriverCommands.onDirectoryExistGotoBlockID(java.lang.String[] parameters)
Goto the named block in the current table if the directory exists.
|
static DriverCommand |
DDDriverFlowCommands.onDirectoryExistGotoBlockID(java.lang.String[] parameters)
Goto the named block in the current table if the directory exists.
|
static DriverCommand |
DriverCommands.onDirectoryExistGotoBlockID(java.lang.String blockID,
java.lang.String directoryName)
Goto the named block in the current table if the directory exists.
|
static DriverCommand |
DDDriverFlowCommands.onDirectoryExistGotoBlockID(java.lang.String blockID,
java.lang.String directoryName)
Goto the named block in the current table if the directory exists.
|
static DriverCommand |
DriverCommands.onDirectoryNotExistGotoBlockID(java.lang.String[] parameters)
Goto the named block in the current table if the Directory does not exist.
|
static DriverCommand |
DDDriverFlowCommands.onDirectoryNotExistGotoBlockID(java.lang.String[] parameters)
Goto the named block in the current table if the Directory does not exist.
|
static DriverCommand |
DriverCommands.onDirectoryNotExistGotoBlockID(java.lang.String blockID,
java.lang.String directoryName)
Goto the named block in the current table if the Directory does not exist.
|
static DriverCommand |
DDDriverFlowCommands.onDirectoryNotExistGotoBlockID(java.lang.String blockID,
java.lang.String directoryName)
Goto the named block in the current table if the Directory does not exist.
|
static DriverCommand |
DriverCommands.onEqualGotoBlockID(java.lang.String[] parameters)
Goto the named block in the current table if two values are equal.
|
static DriverCommand |
DDDriverFlowCommands.onEqualGotoBlockID(java.lang.String[] parameters)
Goto the named block in the current table if two values are equal.
|
static DriverCommand |
DriverCommands.onEqualGotoBlockID(java.lang.String blockID,
java.lang.String value1,
java.lang.String value2,
java.lang.String caseSensitive)
Goto the named block in the current table if two values are equal.
|
static DriverCommand |
DDDriverFlowCommands.onEqualGotoBlockID(java.lang.String blockID,
java.lang.String value1,
java.lang.String value2,
java.lang.String caseSensitive)
Goto the named block in the current table if two values are equal.
|
static DriverCommand |
DriverCommands.onFileEOFGotoBlockID(java.lang.String[] parameters)
Goto the named block in the current table if the file is at EOF.
|
static DriverCommand |
DDDriverFlowCommands.onFileEOFGotoBlockID(java.lang.String[] parameters)
Goto the named block in the current table if the file is at EOF.
|
static DriverCommand |
DriverCommands.onFileEOFGotoBlockID(java.lang.String blockID,
java.lang.String fileNumber)
Goto the named block in the current table if the file is at EOF.
|
static DriverCommand |
DDDriverFlowCommands.onFileEOFGotoBlockID(java.lang.String blockID,
java.lang.String fileNumber)
Goto the named block in the current table if the file is at EOF.
|
static DriverCommand |
DriverCommands.onFileExistGotoBlockID(java.lang.String[] parameters)
Goto the named block in the current table if the file exists.
|
static DriverCommand |
DDDriverFlowCommands.onFileExistGotoBlockID(java.lang.String[] parameters)
Goto the named block in the current table if the file exists.
|
static DriverCommand |
DriverCommands.onFileExistGotoBlockID(java.lang.String blockID,
java.lang.String fileName)
Goto the named block in the current table if the file exists.
|
static DriverCommand |
DDDriverFlowCommands.onFileExistGotoBlockID(java.lang.String blockID,
java.lang.String fileName)
Goto the named block in the current table if the file exists.
|
static DriverCommand |
DriverCommands.onFileNotExistGotoBlockID(java.lang.String[] parameters)
Goto the named block in the current table if the file does not exist.
|
static DriverCommand |
DDDriverFlowCommands.onFileNotExistGotoBlockID(java.lang.String[] parameters)
Goto the named block in the current table if the file does not exist.
|
static DriverCommand |
DriverCommands.onFileNotExistGotoBlockID(java.lang.String blockID,
java.lang.String fileName)
Goto the named block in the current table if the file does not exist.
|
static DriverCommand |
DDDriverFlowCommands.onFileNotExistGotoBlockID(java.lang.String blockID,
java.lang.String fileName)
Goto the named block in the current table if the file does not exist.
|
static DriverCommand |
DriverCommands.onGreaterThanGotoBlockID(java.lang.String[] parameters)
Goto the named block in the current table if value1 is greater than value2.
|
static DriverCommand |
DDDriverFlowCommands.onGreaterThanGotoBlockID(java.lang.String[] parameters)
Goto the named block in the current table if value1 is greater than value2.
|
static DriverCommand |
DriverCommands.onGreaterThanGotoBlockID(java.lang.String blockID,
java.lang.String value1,
java.lang.String value2,
java.lang.String caseSensitive)
Goto the named block in the current table if value1 is greater than value2.
|
static DriverCommand |
DDDriverFlowCommands.onGreaterThanGotoBlockID(java.lang.String blockID,
java.lang.String value1,
java.lang.String value2,
java.lang.String caseSensitive)
Goto the named block in the current table if value1 is greater than value2.
|
static DriverCommand |
DriverCommands.onGUIExistsGotoBlockID(java.lang.String[] parameters)
Goto the named block in the current table if a GUI component exists.
|
static DriverCommand |
DDDriverFlowCommands.onGUIExistsGotoBlockID(java.lang.String[] parameters)
Goto the named block in the current table if a GUI component exists.
|
static DriverCommand |
DriverCommands.onGUIExistsGotoBlockID(java.lang.String blockID,
java.lang.String windowID,
java.lang.String componentID,
java.lang.String timeOut)
Goto the named block in the current table if a GUI component exists.
|
static DriverCommand |
DDDriverFlowCommands.onGUIExistsGotoBlockID(java.lang.String blockID,
java.lang.String windowID,
java.lang.String componentID,
java.lang.String timeOut)
Goto the named block in the current table if a GUI component exists.
|
static DriverCommand |
DriverCommands.onGUINotExistGotoBlockID(java.lang.String[] parameters)
Goto the named block in the current table if a GUI component does not exist.
|
static DriverCommand |
DDDriverFlowCommands.onGUINotExistGotoBlockID(java.lang.String[] parameters)
Goto the named block in the current table if a GUI component does not exist.
|
static DriverCommand |
DriverCommands.onGUINotExistGotoBlockID(java.lang.String blockID,
java.lang.String windowID,
java.lang.String componentID,
java.lang.String timeOut)
Goto the named block in the current table if a GUI component does not exist.
|
static DriverCommand |
DDDriverFlowCommands.onGUINotExistGotoBlockID(java.lang.String blockID,
java.lang.String windowID,
java.lang.String componentID,
java.lang.String timeOut)
Goto the named block in the current table if a GUI component does not exist.
|
static DriverCommand |
DriverCommands.onInRangeGotoBlockID(java.lang.String[] parameters)
Goto named block if value1 is between value2 and value3.
|
static DriverCommand |
DDDriverFlowCommands.onInRangeGotoBlockID(java.lang.String[] parameters)
Goto named block if value1 is between value2 and value3.
|
static DriverCommand |
DriverCommands.onInRangeGotoBlockID(java.lang.String blockID,
java.lang.String value1,
java.lang.String value2,
java.lang.String value3,
java.lang.String caseSensitive)
Goto named block if value1 is between value2 and value3.
|
static DriverCommand |
DDDriverFlowCommands.onInRangeGotoBlockID(java.lang.String blockID,
java.lang.String value1,
java.lang.String value2,
java.lang.String value3,
java.lang.String caseSensitive)
Goto named block if value1 is between value2 and value3.
|
static DriverCommand |
DriverCommands.onLessThanGotoBlockID(java.lang.String[] parameters)
Goto the named block if value1 is less than value2.
|
static DriverCommand |
DDDriverFlowCommands.onLessThanGotoBlockID(java.lang.String[] parameters)
Goto the named block if value1 is less than value2.
|
static DriverCommand |
DriverCommands.onLessThanGotoBlockID(java.lang.String blockID,
java.lang.String value1,
java.lang.String value2,
java.lang.String caseSensitive)
Goto the named block if value1 is less than value2.
|
static DriverCommand |
DDDriverFlowCommands.onLessThanGotoBlockID(java.lang.String blockID,
java.lang.String value1,
java.lang.String value2,
java.lang.String caseSensitive)
Goto the named block if value1 is less than value2.
|
static DriverCommand |
DriverCommands.onMenuItemContainsStateGotoBlockID(java.lang.String[] parameters)
Goto the named block in the current table if state is part of the state information of the menuitem.
|
static DriverCommand |
DDDriverFlowCommands.onMenuItemContainsStateGotoBlockID(java.lang.String[] parameters)
Goto the named block in the current table if state is part of the state information of the menuitem.
|
static DriverCommand |
DriverCommands.onMenuItemContainsStateGotoBlockID(java.lang.String blockID,
java.lang.String windowName,
java.lang.String componentName,
java.lang.String menuItem,
java.lang.String state)
Goto the named block in the current table if state is part of the state information of the menuitem.
|
static DriverCommand |
DDDriverFlowCommands.onMenuItemContainsStateGotoBlockID(java.lang.String blockID,
java.lang.String windowName,
java.lang.String componentName,
java.lang.String menuItem,
java.lang.String state)
Goto the named block in the current table if state is part of the state information of the menuitem.
|
static DriverCommand |
DriverCommands.onNotContainsGotoBlockID(java.lang.String[] parameters)
Goto the named block in the current table if value2 is NOT a substring of value1.
|
static DriverCommand |
DDDriverFlowCommands.onNotContainsGotoBlockID(java.lang.String[] parameters)
Goto the named block in the current table if value2 is NOT a substring of value1.
|
static DriverCommand |
DriverCommands.onNotContainsGotoBlockID(java.lang.String blockID,
java.lang.String value1,
java.lang.String value2,
java.lang.String caseSensitive)
Goto the named block in the current table if value2 is NOT a substring of value1.
|
static DriverCommand |
DDDriverFlowCommands.onNotContainsGotoBlockID(java.lang.String blockID,
java.lang.String value1,
java.lang.String value2,
java.lang.String caseSensitive)
Goto the named block in the current table if value2 is NOT a substring of value1.
|
static DriverCommand |
DriverCommands.onNotEqualGotoBlockID(java.lang.String[] parameters)
Goto the named block in the current table if two values are not equal.
|
static DriverCommand |
DDDriverFlowCommands.onNotEqualGotoBlockID(java.lang.String[] parameters)
Goto the named block in the current table if two values are not equal.
|
static DriverCommand |
DriverCommands.onNotEqualGotoBlockID(java.lang.String blockID,
java.lang.String value1,
java.lang.String value2,
java.lang.String caseSensitive)
Goto the named block in the current table if two values are not equal.
|
static DriverCommand |
DDDriverFlowCommands.onNotEqualGotoBlockID(java.lang.String blockID,
java.lang.String value1,
java.lang.String value2,
java.lang.String caseSensitive)
Goto the named block in the current table if two values are not equal.
|
static DriverCommand |
DriverCommands.onNotGreaterThanGotoBlockID(java.lang.String[] parameters)
Goto the named block in the current table if value1 is NOT greater than value2.
|
static DriverCommand |
DDDriverFlowCommands.onNotGreaterThanGotoBlockID(java.lang.String[] parameters)
Goto the named block in the current table if value1 is NOT greater than value2.
|
static DriverCommand |
DriverCommands.onNotGreaterThanGotoBlockID(java.lang.String blockID,
java.lang.String value1,
java.lang.String value2,
java.lang.String caseSensitive)
Goto the named block in the current table if value1 is NOT greater than value2.
|
static DriverCommand |
DDDriverFlowCommands.onNotGreaterThanGotoBlockID(java.lang.String blockID,
java.lang.String value1,
java.lang.String value2,
java.lang.String caseSensitive)
Goto the named block in the current table if value1 is NOT greater than value2.
|
static DriverCommand |
DriverCommands.onNotInRangeGotoBlockID(java.lang.String[] parameters)
Goto the named block in the current table if value1 is not between value2 and value3.
|
static DriverCommand |
DDDriverFlowCommands.onNotInRangeGotoBlockID(java.lang.String[] parameters)
Goto the named block in the current table if value1 is not between value2 and value3.
|
static DriverCommand |
DriverCommands.onNotInRangeGotoBlockID(java.lang.String blockID,
java.lang.String value1,
java.lang.String value2,
java.lang.String value3,
java.lang.String caseSensitive)
Goto the named block in the current table if value1 is not between value2 and value3.
|
static DriverCommand |
DDDriverFlowCommands.onNotInRangeGotoBlockID(java.lang.String blockID,
java.lang.String value1,
java.lang.String value2,
java.lang.String value3,
java.lang.String caseSensitive)
Goto the named block in the current table if value1 is not between value2 and value3.
|
static DriverCommand |
DriverCommands.onNotLessThanGotoBlockID(java.lang.String[] parameters)
Goto the named block if value1 is NOT less than value2.
|
static DriverCommand |
DDDriverFlowCommands.onNotLessThanGotoBlockID(java.lang.String[] parameters)
Goto the named block if value1 is NOT less than value2.
|
static DriverCommand |
DriverCommands.onNotLessThanGotoBlockID(java.lang.String blockID,
java.lang.String value1,
java.lang.String value2,
java.lang.String caseSensitive)
Goto the named block if value1 is NOT less than value2.
|
static DriverCommand |
DDDriverFlowCommands.onNotLessThanGotoBlockID(java.lang.String blockID,
java.lang.String value1,
java.lang.String value2,
java.lang.String caseSensitive)
Goto the named block if value1 is NOT less than value2.
|
static DriverCommand |
DriverCommands.onPartialMenuItemContainsStateGotoBlockID(java.lang.String[] parameters)
Goto the named block in the current table if state is part of the state information of the menuitem.
|
static DriverCommand |
DDDriverFlowCommands.onPartialMenuItemContainsStateGotoBlockID(java.lang.String[] parameters)
Goto the named block in the current table if state is part of the state information of the menuitem.
|
static DriverCommand |
DriverCommands.onPartialMenuItemContainsStateGotoBlockID(java.lang.String blockID,
java.lang.String windowName,
java.lang.String componentName,
java.lang.String menuItem,
java.lang.String state)
Goto the named block in the current table if state is part of the state information of the menuitem.
|
static DriverCommand |
DDDriverFlowCommands.onPartialMenuItemContainsStateGotoBlockID(java.lang.String blockID,
java.lang.String windowName,
java.lang.String componentName,
java.lang.String menuItem,
java.lang.String state)
Goto the named block in the current table if state is part of the state information of the menuitem.
|
static DriverCommand |
DriverCommands.onRegistryKeyExistGotoBlockID(java.lang.String[] parameters)
Goto the named block in the current table if the Registry Key exists.
|
static DriverCommand |
DDDriverFlowCommands.onRegistryKeyExistGotoBlockID(java.lang.String[] parameters)
Goto the named block in the current table if the Registry Key exists.
|
static DriverCommand |
DriverCommands.onRegistryKeyExistGotoBlockID(java.lang.String blockID,
java.lang.String key,
java.lang.String keyValue,
java.lang.String timeOut)
Goto the named block in the current table if the Registry Key exists.
|
static DriverCommand |
DDDriverFlowCommands.onRegistryKeyExistGotoBlockID(java.lang.String blockID,
java.lang.String key,
java.lang.String keyValue,
java.lang.String timeOut)
Goto the named block in the current table if the Registry Key exists.
|
static DriverCommand |
DriverCommands.onRegistryKeyNotExistGotoBlockID(java.lang.String[] parameters)
Goto the named block in the current table if the Registry Key does not exist.
|
static DriverCommand |
DDDriverFlowCommands.onRegistryKeyNotExistGotoBlockID(java.lang.String[] parameters)
Goto the named block in the current table if the Registry Key does not exist.
|
static DriverCommand |
DriverCommands.onRegistryKeyNotExistGotoBlockID(java.lang.String blockID,
java.lang.String key,
java.lang.String keyValue,
java.lang.String timeOut)
Goto the named block in the current table if the Registry Key does not exist.
|
static DriverCommand |
DDDriverFlowCommands.onRegistryKeyNotExistGotoBlockID(java.lang.String blockID,
java.lang.String key,
java.lang.String keyValue,
java.lang.String timeOut)
Goto the named block in the current table if the Registry Key does not exist.
|
static DriverCommand |
DriverCommands.openFile(java.lang.String[] parameters)
Open an existing file with the filename, mode and access provided.
|
static DriverCommand |
DDDriverFileCommands.openFile(java.lang.String[] parameters)
Open an existing file with the filename, mode and access provided.
|
static DriverCommand |
DriverCommands.openFile(java.lang.String fileName,
java.lang.String mode,
java.lang.String access,
java.lang.String fileNumberVariable,
java.lang.String fileNumber)
Open an existing file with the filename, mode and access provided.
|
static DriverCommand |
DDDriverFileCommands.openFile(java.lang.String fileName,
java.lang.String mode,
java.lang.String access,
java.lang.String fileNumberVariable,
java.lang.String fileNumber)
Open an existing file with the filename, mode and access provided.
|
static DriverCommand |
DriverCommands.openUTF8File(java.lang.String[] parameters)
Open an existing UTF-8 file with the filename, mode and access provided.
|
static DriverCommand |
DDDriverFileCommands.openUTF8File(java.lang.String[] parameters)
Open an existing UTF-8 file with the filename, mode and access provided.
|
static DriverCommand |
DriverCommands.openUTF8File(java.lang.String fileName,
java.lang.String mode,
java.lang.String access,
java.lang.String fileNumberVariable,
java.lang.String fileNumber)
Open an existing UTF-8 file with the filename, mode and access provided.
|
static DriverCommand |
DDDriverFileCommands.openUTF8File(java.lang.String fileName,
java.lang.String mode,
java.lang.String access,
java.lang.String fileNumberVariable,
java.lang.String fileNumber)
Open an existing UTF-8 file with the filename, mode and access provided.
|
static DriverCommand |
DriverCommands.pause(java.lang.String timeout)
Pause for a specified number of seconds.
|
static DriverCommand |
DDDriverCommands.pause(java.lang.String timeout)
Pause for a specified number of seconds.
|
static DriverCommand |
DriverCommands.printToFile(java.lang.String[] parameters)
Write output to a sequential file already opened for writing.
|
static DriverCommand |
DDDriverFileCommands.printToFile(java.lang.String[] parameters)
Write output to a sequential file already opened for writing.
|
static DriverCommand |
DriverCommands.printToFile(java.lang.String fileNumber,
java.lang.String expressionListVariable,
java.lang.String printOutputPlacement)
Write output to a sequential file already opened for writing.
|
static DriverCommand |
DDDriverFileCommands.printToFile(java.lang.String fileNumber,
java.lang.String expressionListVariable,
java.lang.String printOutputPlacement)
Write output to a sequential file already opened for writing.
|
static DriverCommand |
DriverCommands.readFileChars(java.lang.String[] parameters)
Read the number of characters from the file defined by file number
and assign a string containing the characters read to a DDV variable.
|
static DriverCommand |
DDDriverFileCommands.readFileChars(java.lang.String[] parameters)
Read the number of characters from the file defined by file number
and assign a string containing the characters read to a DDV variable.
|
static DriverCommand |
DriverCommands.readFileChars(java.lang.String fileNumber,
java.lang.String numberOfChar,
java.lang.String variableName)
Read the number of characters from the file defined by file number
and assign a string containing the characters read to a DDV variable.
|
static DriverCommand |
DDDriverFileCommands.readFileChars(java.lang.String fileNumber,
java.lang.String numberOfChar,
java.lang.String variableName)
Read the number of characters from the file defined by file number
and assign a string containing the characters read to a DDV variable.
|
static DriverCommand |
DriverCommands.readFileLine(java.lang.String[] parameters)
Read a line from the file defined by file number and assign a string containing the line read to a DDV variable.
|
static DriverCommand |
DDDriverFileCommands.readFileLine(java.lang.String[] parameters)
Read a line from the file defined by file number and assign a string containing the line read to a DDV variable.
|
static DriverCommand |
DriverCommands.readFileLine(java.lang.String fileNumber,
java.lang.String variableName)
Read a line from the file defined by file number and assign a string containing the line read to a DDV variable.
|
static DriverCommand |
DDDriverFileCommands.readFileLine(java.lang.String fileNumber,
java.lang.String variableName)
Read a line from the file defined by file number and assign a string containing the line read to a DDV variable.
|
static DriverCommand |
DriverCommands.readFileString(java.lang.String[] parameters)
Read a comma-separated value from a file and store it in a DDVariable.
|
static DriverCommand |
DDDriverFileCommands.readFileString(java.lang.String[] parameters)
Read a comma-separated value from a file and store it in a DDVariable.
|
static DriverCommand |
DriverCommands.readFileString(java.lang.String fileNumber,
java.lang.String variableName)
Read a comma-separated value from a file and store it in a DDVariable.
|
static DriverCommand |
DDDriverFileCommands.readFileString(java.lang.String fileNumber,
java.lang.String variableName)
Read a comma-separated value from a file and store it in a DDVariable.
|
static DriverCommand |
DriverCommands.recordsDebug(java.lang.String mode)
Enable and Disable debugging of ALL record types.
|
static DriverCommand |
DDDriverDebugCommands.recordsDebug(java.lang.String mode)
Enable and Disable debugging of ALL record types.
|
static DriverCommand |
DriverCommands.renameFile(java.lang.String[] parameters)
Rename the file from the old file name to the new filename
|
static DriverCommand |
DDDriverFileCommands.renameFile(java.lang.String[] parameters)
Rename the file from the old file name to the new filename
|
static DriverCommand |
DriverCommands.renameFile(java.lang.String oldFileName,
java.lang.String newFileName,
java.lang.String noVerify)
Rename the file from the old file name to the new filename
|
static DriverCommand |
DDDriverFileCommands.renameFile(java.lang.String oldFileName,
java.lang.String newFileName,
java.lang.String noVerify)
Rename the file from the old file name to the new filename
|
static DriverCommand |
DriverCommands.replace(java.lang.String[] parameters)
Replace 'find' substring with 'replace' substring
|
static DriverCommand |
DDDriverStringCommands.replace(java.lang.String[] parameters)
Replace 'find' substring with 'replace' substring
|
static DriverCommand |
DriverCommands.replace(java.lang.String sourceString,
java.lang.String findString,
java.lang.String replaceString,
java.lang.String resultVar)
Replace 'find' substring with 'replace' substring
|
static DriverCommand |
DDDriverStringCommands.replace(java.lang.String sourceString,
java.lang.String findString,
java.lang.String replaceString,
java.lang.String resultVar)
Replace 'find' substring with 'replace' substring
|
static DriverCommand |
DriverCommands.resetCounter(java.lang.String[] parameters)
Create a new private counter or reset counts in an existing private counter.
|
static DriverCommand |
DDDriverCounterCommands.resetCounter(java.lang.String[] parameters)
Create a new private counter or reset counts in an existing private counter.
|
static DriverCommand |
DriverCommands.resetCounter(java.lang.String counterID,
java.lang.String description)
Create a new private counter or reset counts in an existing private counter.
|
static DriverCommand |
DDDriverCounterCommands.resetCounter(java.lang.String counterID,
java.lang.String description)
Create a new private counter or reset counts in an existing private counter.
|
static DriverCommand |
DriverCommands.resetTimer(java.lang.String timerName)
Reset a "stopped" timer for reuse.
|
static DriverCommand |
DDDriverTimerCommands.resetTimer(java.lang.String timerName)
Reset a "stopped" timer for reuse.
|
static DriverCommand |
DriverCommands.restCleanResponseMap(java.lang.String responseID)
Delete REST response (and request if it is stored) from the internal Map.
|
static DriverCommand |
DDDriverRestCommands.restCleanResponseMap(java.lang.String responseID)
Delete REST response (and request if it is stored) from the internal Map.
|
static DriverCommand |
DriverCommands.restDeleteResponse(java.lang.String responseID)
Delete a REST response (and request if stored) from the persistent storages.
|
static DriverCommand |
DDDriverRestCommands.restDeleteResponse(java.lang.String responseID)
Delete a REST response (and request if stored) from the persistent storages.
|
static DriverCommand |
DriverCommands.restDeleteResponseStore()
Delete ALL REST responses (and requests if stored) from the persistent storages.
|
static DriverCommand |
DDDriverRestCommands.restDeleteResponseStore()
Delete ALL REST responses (and requests if stored) from the persistent storages.
|
static DriverCommand |
DriverCommands.restHeadersLoad(java.lang.String[] parameters)
Load headers from a file.
|
static DriverCommand |
DDDriverRestCommands.restHeadersLoad(java.lang.String[] parameters)
Load headers from a file.
|
static DriverCommand |
DriverCommands.restHeadersLoad(java.lang.String headersFile,
java.lang.String method,
java.lang.String type)
Load headers from a file.
|
static DriverCommand |
DDDriverRestCommands.restHeadersLoad(java.lang.String headersFile,
java.lang.String method,
java.lang.String type)
Load headers from a file.
|
static DriverCommand |
DriverCommands.restStoreResponse(java.lang.String[] parameters)
Save a REST response into a persistent storage.
|
static DriverCommand |
DDDriverRestCommands.restStoreResponse(java.lang.String[] parameters)
Save a REST response into a persistent storage.
|
static DriverCommand |
DriverCommands.restStoreResponse(java.lang.String responseID,
java.lang.String variablePrefix,
java.lang.String storeRequest,
java.lang.String persistenceType,
java.lang.String fileType)
Save a REST response into a persistent storage.
|
static DriverCommand |
DDDriverRestCommands.restStoreResponse(java.lang.String responseID,
java.lang.String variablePrefix,
java.lang.String storeRequest,
java.lang.String persistenceType,
java.lang.String fileType)
Save a REST response into a persistent storage.
|
static DriverCommand |
DriverCommands.restVerifyResponse(java.lang.String[] parameters)
Verify a REST response is what is expected.
|
static DriverCommand |
DDDriverRestCommands.restVerifyResponse(java.lang.String[] parameters)
Verify a REST response is what is expected.
|
static DriverCommand |
DriverCommands.restVerifyResponse(java.lang.String responseID,
java.lang.String benchFile,
java.lang.String fileType,
java.lang.String result,
java.lang.String verifyRequest,
java.lang.String valueContains,
java.lang.String valueCaseSensitive)
Verify a REST response is what is expected.
|
static DriverCommand |
DDDriverRestCommands.restVerifyResponse(java.lang.String responseID,
java.lang.String benchFile,
java.lang.String fileType,
java.lang.String result,
java.lang.String verifyRequest,
java.lang.String valueContains,
java.lang.String valueCaseSensitive)
Verify a REST response is what is expected.
|
static DriverCommand |
DriverCommands.restVerifyResponseContains(java.lang.String[] parameters)
Verify a REST response contains what is expected.
|
static DriverCommand |
DDDriverRestCommands.restVerifyResponseContains(java.lang.String[] parameters)
Verify a REST response contains what is expected.
|
static DriverCommand |
DriverCommands.restVerifyResponseContains(java.lang.String responseID,
java.lang.String benchFile,
java.lang.String fileType,
java.lang.String result,
java.lang.String verifyRequest,
java.lang.String valueContains,
java.lang.String valueCaseSensitive)
Verify a REST response contains what is expected.
|
static DriverCommand |
DDDriverRestCommands.restVerifyResponseContains(java.lang.String responseID,
java.lang.String benchFile,
java.lang.String fileType,
java.lang.String result,
java.lang.String verifyRequest,
java.lang.String valueContains,
java.lang.String valueCaseSensitive)
Verify a REST response contains what is expected.
|
static DriverCommand |
DriverCommands.resumeLogging(java.lang.String logName)
Resume suspended logging.
|
static DriverCommand |
DDDriverLogCommands.resumeLogging(java.lang.String logName)
Resume suspended logging.
|
static DriverCommand |
DriverCommands.resumeStatusCounts(java.lang.String[] parameters)
Resume counting on ALL status counters--both public/global and private.
|
static DriverCommand |
DDDriverCounterCommands.resumeStatusCounts(java.lang.String[] parameters)
Resume counting on ALL status counters--both public/global and private.
|
static DriverCommand |
DriverCommands.resumeStatusCounts(java.lang.String description,
java.lang.String logName)
Resume counting on ALL status counters--both public/global and private.
|
static DriverCommand |
DDDriverCounterCommands.resumeStatusCounts(java.lang.String description,
java.lang.String logName)
Resume counting on ALL status counters--both public/global and private.
|
static DriverCommand |
DriverCommands.right(java.lang.String[] parameters)
Returns a string of a specified number of characters copied from the end of another string.
|
static DriverCommand |
DDDriverStringCommands.right(java.lang.String[] parameters)
Returns a string of a specified number of characters copied from the end of another string.
|
static DriverCommand |
DriverCommands.right(java.lang.String sourceString,
java.lang.String length,
java.lang.String resultVar)
Returns a string of a specified number of characters copied from the end of another string.
|
static DriverCommand |
DDDriverStringCommands.right(java.lang.String sourceString,
java.lang.String length,
java.lang.String resultVar)
Returns a string of a specified number of characters copied from the end of another string.
|
static DriverCommand |
DriverCommands.rightTrim(java.lang.String[] parameters)
A new string trimmed of trailing tabs and spaces.
|
static DriverCommand |
DDDriverStringCommands.rightTrim(java.lang.String[] parameters)
A new string trimmed of trailing tabs and spaces.
|
static DriverCommand |
DriverCommands.rightTrim(java.lang.String sourceString,
java.lang.String resultVar)
A new string trimmed of trailing tabs and spaces.
|
static DriverCommand |
DDDriverStringCommands.rightTrim(java.lang.String sourceString,
java.lang.String resultVar)
A new string trimmed of trailing tabs and spaces.
|
static DriverCommand |
DriverCommands.saveClipboardToFile(java.lang.String[] parameters)
Save the clipboard contents to a text file.
|
static DriverCommand |
DDDriverCommands.saveClipboardToFile(java.lang.String[] parameters)
Save the clipboard contents to a text file.
|
static DriverCommand |
DriverCommands.saveClipboardToFile(java.lang.String file,
java.lang.String encoding)
Save the clipboard contents to a text file.
|
static DriverCommand |
DDDriverCommands.saveClipboardToFile(java.lang.String file,
java.lang.String encoding)
Save the clipboard contents to a text file.
|
static DriverCommand |
DriverCommands.saveTextFromImage(java.lang.String[] parameters)
Incorporate OCR technology to detect the text in an image file and save the text to a text file.
|
static DriverCommand |
DDDriverFileCommands.saveTextFromImage(java.lang.String[] parameters)
Incorporate OCR technology to detect the text in an image file and save the text to a text file.
|
static DriverCommand |
DriverCommands.saveTextFromImage(java.lang.String imageFile,
java.lang.String outputFile,
java.lang.String oCRId,
java.lang.String langId,
java.lang.String scaleRatio)
Incorporate OCR technology to detect the text in an image file and save the text to a text file.
|
static DriverCommand |
DDDriverFileCommands.saveTextFromImage(java.lang.String imageFile,
java.lang.String outputFile,
java.lang.String oCRId,
java.lang.String langId,
java.lang.String scaleRatio)
Incorporate OCR technology to detect the text in an image file and save the text to a text file.
|
static DriverCommand |
DriverCommands.saveURLToFile(java.lang.String[] parameters)
Send an HTTP GET request, and save the response into a file.
|
static DriverCommand |
DDDriverCommands.saveURLToFile(java.lang.String[] parameters)
Send an HTTP GET request, and save the response into a file.
|
static DriverCommand |
DriverCommands.saveURLToFile(java.lang.String uRL,
java.lang.String file,
java.lang.String timeout,
java.lang.String headerName,
java.lang.String headerValue)
Send an HTTP GET request, and save the response into a file.
|
static DriverCommand |
DDDriverCommands.saveURLToFile(java.lang.String uRL,
java.lang.String file,
java.lang.String timeout,
java.lang.String headerName,
java.lang.String headerValue)
Send an HTTP GET request, and save the response into a file.
|
static DriverCommand |
DriverCommands.scrollWheel(java.lang.String numClicks)
Move mouse wheel forward (up) or backward (down).
|
static DriverCommand |
DDDriverCommands.scrollWheel(java.lang.String numClicks)
Move mouse wheel forward (up) or backward (down).
|
static DriverCommand |
DriverCommands.sendEmail(java.lang.String[] parameters)
Send email notification with attachments.Send email notification with attachments.
|
static DriverCommand |
DDDriverCommands.sendEmail(java.lang.String[] parameters)
Send email notification with attachments.Send email notification with attachments.
|
static DriverCommand |
DriverCommands.sendEmail(java.lang.String from,
java.lang.String to,
java.lang.String subject,
java.lang.String message,
java.lang.String attachment)
Send email notification with attachments.Send email notification with attachments.
|
static DriverCommand |
DDDriverCommands.sendEmail(java.lang.String from,
java.lang.String to,
java.lang.String subject,
java.lang.String message,
java.lang.String attachment)
Send email notification with attachments.Send email notification with attachments.
|
static DriverCommand |
DriverCommands.setApplicationMap(java.lang.String applicationMap)
Provide the Application Map for the DDE to use
Provide the Application Map for the DDE to use.
|
static DriverCommand |
DDDriverCommands.setApplicationMap(java.lang.String applicationMap)
Provide the Application Map for the DDE to use
Provide the Application Map for the DDE to use.
|
static DriverCommand |
DriverCommands.setBenchDirectory(java.lang.String path)
Set/Change the directory in which the framework will find
benchmark files by default.
|
static DriverCommand |
DDDriverCommands.setBenchDirectory(java.lang.String path)
Set/Change the directory in which the framework will find
benchmark files by default.
|
static DriverCommand |
DriverCommands.setClipboard(java.lang.String str)
Set the clipboard contents to a string.
|
static DriverCommand |
DDDriverCommands.setClipboard(java.lang.String str)
Set the clipboard contents to a string.
|
static DriverCommand |
DriverCommands.setContext(java.lang.String[] parameters)
Set a Window or Window Component as the current Robot context.
|
static DriverCommand |
DDDriverCommands.setContext(java.lang.String[] parameters)
Set a Window or Window Component as the current Robot context.
|
static DriverCommand |
DriverCommands.setContext(java.lang.String windowID,
java.lang.String componentID)
Set a Window or Window Component as the current Robot context.
|
static DriverCommand |
DDDriverCommands.setContext(java.lang.String windowID,
java.lang.String componentID)
Set a Window or Window Component as the current Robot context.
|
static DriverCommand |
DriverCommands.setCounterMode(java.lang.String[] parameters)
Create a new private counter or modify the mode of an existing private counter.
|
static DriverCommand |
DDDriverCounterCommands.setCounterMode(java.lang.String[] parameters)
Create a new private counter or modify the mode of an existing private counter.
|
static DriverCommand |
DriverCommands.setCounterMode(java.lang.String counterID,
java.lang.String mode)
Create a new private counter or modify the mode of an existing private counter.
|
static DriverCommand |
DDDriverCounterCommands.setCounterMode(java.lang.String counterID,
java.lang.String mode)
Create a new private counter or modify the mode of an existing private counter.
|
static DriverCommand |
DriverCommands.setDifDirectory(java.lang.String path)
Set/Change the directory in which the framework will locate
file compare differences.
|
static DriverCommand |
DDDriverCommands.setDifDirectory(java.lang.String path)
Set/Change the directory in which the framework will locate
file compare differences.
|
static DriverCommand |
DriverCommands.setExitTableBlock(java.lang.String blockID)
Set or clear the name of a block to execute when the ExitTable command is encountered.
|
static DriverCommand |
DDDriverFlowCommands.setExitTableBlock(java.lang.String blockID)
Set or clear the name of a block to execute when the ExitTable command is encountered.
|
static DriverCommand |
DriverCommands.setFileProtections(java.lang.String[] parameters)
Change the file attribute for the file name provided to the value of the new file protection provided.
|
static DriverCommand |
DDDriverFileCommands.setFileProtections(java.lang.String[] parameters)
Change the file attribute for the file name provided to the value of the new file protection provided.
|
static DriverCommand |
DriverCommands.setFileProtections(java.lang.String fileName,
java.lang.String fileProtection)
Change the file attribute for the file name provided to the value of the new file protection provided.
|
static DriverCommand |
DDDriverFileCommands.setFileProtections(java.lang.String fileName,
java.lang.String fileProtection)
Change the file attribute for the file name provided to the value of the new file protection provided.
|
static DriverCommand |
DriverCommands.setFocus(java.lang.String[] parameters)
Give a Window or Window Component input focus.
|
static DriverCommand |
DDDriverCommands.setFocus(java.lang.String[] parameters)
Give a Window or Window Component input focus.
|
static DriverCommand |
DriverCommands.setFocus(java.lang.String windowID,
java.lang.String componentID)
Give a Window or Window Component input focus.
|
static DriverCommand |
DDDriverCommands.setFocus(java.lang.String windowID,
java.lang.String componentID)
Give a Window or Window Component input focus.
|
static DriverCommand |
DriverCommands.setGeneralScriptFailureBlock(java.lang.String blockID)
Set or clear the name of a block to execute when GeneralScriptFailure occurs.
|
static DriverCommand |
DDDriverFlowCommands.setGeneralScriptFailureBlock(java.lang.String blockID)
Set or clear the name of a block to execute when GeneralScriptFailure occurs.
|
static DriverCommand |
DriverCommands.setImageDebug(java.lang.String mode)
Enable/Disable verbose debug log output and high-res failure snapshots.
|
static DriverCommand |
DDDriverCommands.setImageDebug(java.lang.String mode)
Enable/Disable verbose debug log output and high-res failure snapshots.
|
static DriverCommand |
DriverCommands.setImageFuzzyMatching(java.lang.String mode)
Enable/Disable Image-Based Testing Fuzzy Matching.
|
static DriverCommand |
DDDriverCommands.setImageFuzzyMatching(java.lang.String mode)
Enable/Disable Image-Based Testing Fuzzy Matching.
|
static DriverCommand |
DriverCommands.setInvalidFileIOBlock(java.lang.String blockID)
Set or clear the name of a block to execute when InvalidFileIO occurs.
|
static DriverCommand |
DDDriverFlowCommands.setInvalidFileIOBlock(java.lang.String blockID)
Set or clear the name of a block to execute when InvalidFileIO occurs.
|
static DriverCommand |
DriverCommands.setJdbcDriver(java.lang.String driverClassName)
set Jdbc Driver
sets a JDBC driver, can be called more than once with
multiple drivers.
|
static DriverCommand |
DDDriverDatabaseCommands.setJdbcDriver(java.lang.String driverClassName)
set Jdbc Driver
sets a JDBC driver, can be called more than once with
multiple drivers.
|
static DriverCommand |
DriverCommands.setMillisBetweenRecords(java.lang.String value)
Set the pause between two records.
|
static DriverCommand |
DDDriverCommands.setMillisBetweenRecords(java.lang.String value)
Set the pause between two records.
|
static DriverCommand |
DriverCommands.setMultipleThreadSearch(java.lang.String onOrOff)
Turn on or trun off the multi-thread-search way to search an image.
|
static DriverCommand |
DDDriverCommands.setMultipleThreadSearch(java.lang.String onOrOff)
Turn on or trun off the multi-thread-search way to search an image.
|
static DriverCommand |
DriverCommands.setNetworkConditions(java.lang.String networkConditions)
Set network conditions.
|
static DriverCommand |
DDDriverCommands.setNetworkConditions(java.lang.String networkConditions)
Set network conditions.
|
static DriverCommand |
DriverCommands.setNoScriptFailureBlock(java.lang.String blockID)
Set or clear the name of a block to execute when NoScriptFailure occurs.
|
static DriverCommand |
DDDriverFlowCommands.setNoScriptFailureBlock(java.lang.String blockID)
Set or clear the name of a block to execute when NoScriptFailure occurs.
|
static DriverCommand |
DriverCommands.setProjectDirectory(java.lang.String path)
Set/Change the framework project directory.
|
static DriverCommand |
DDDriverCommands.setProjectDirectory(java.lang.String path)
Set/Change the framework project directory.
|
static DriverCommand |
DriverCommands.setRequirement(java.lang.String[] parameters)
DEPRECATED.
|
static DriverCommand |
DDDriverDeprecatedCommands.setRequirement(java.lang.String[] parameters)
DEPRECATED.
|
static DriverCommand |
DriverCommands.setRequirement(java.lang.String requirementID,
java.lang.String description)
DEPRECATED.
|
static DriverCommand |
DDDriverDeprecatedCommands.setRequirement(java.lang.String requirementID,
java.lang.String description)
DEPRECATED.
|
static DriverCommand |
DriverCommands.setRootVerifyDirectory(java.lang.String path)
Set/Change the Bench, Test, and Dif directories
to be subdirectories off of the provided path.
|
static DriverCommand |
DDDriverCommands.setRootVerifyDirectory(java.lang.String path)
Set/Change the Bench, Test, and Dif directories
to be subdirectories off of the provided path.
|
static DriverCommand |
DriverCommands.setScriptNotExecutedBlock(java.lang.String blockID)
Set or clear the name of a block to execute when ScriptNotExecuted occurs.
|
static DriverCommand |
DDDriverFlowCommands.setScriptNotExecutedBlock(java.lang.String blockID)
Set or clear the name of a block to execute when ScriptNotExecuted occurs.
|
static DriverCommand |
DriverCommands.setScriptWarningBlock(java.lang.String blockID)
Set or clear the name of a block to execute when ScriptWarning occurs.
|
static DriverCommand |
DDDriverFlowCommands.setScriptWarningBlock(java.lang.String blockID)
Set or clear the name of a block to execute when ScriptWarning occurs.
|
static DriverCommand |
DriverCommands.setSecsAfterWindowActive(java.lang.String value)
Set the delay after window is activated.
|
static DriverCommand |
DDDriverCommands.setSecsAfterWindowActive(java.lang.String value)
Set the delay after window is activated.
|
static DriverCommand |
DriverCommands.setSecsBeforeMouseDown(java.lang.String value)
Set the delay before mouse down.
|
static DriverCommand |
DDDriverCommands.setSecsBeforeMouseDown(java.lang.String value)
Set the delay before mouse down.
|
static DriverCommand |
DriverCommands.setSecsBeforeMouseUp(java.lang.String value)
Set the delay before mouse up.
|
static DriverCommand |
DDDriverCommands.setSecsBeforeMouseUp(java.lang.String value)
Set the delay before mouse up.
|
static DriverCommand |
DriverCommands.setSecsDelayRetryComponent(java.lang.String value)
Set the delay of re-finding object.
|
static DriverCommand |
DDDriverCommands.setSecsDelayRetryComponent(java.lang.String value)
Set the delay of re-finding object.
|
static DriverCommand |
DriverCommands.setSecsSeekComponent(java.lang.String variableName)
Set the timeout of finding object.
|
static DriverCommand |
DDDriverCommands.setSecsSeekComponent(java.lang.String variableName)
Set the timeout of finding object.
|
static DriverCommand |
DriverCommands.setTestcase(java.lang.String[] parameters)
DEPRECATED.
|
static DriverCommand |
DDDriverDeprecatedCommands.setTestcase(java.lang.String[] parameters)
DEPRECATED.
|
static DriverCommand |
DriverCommands.setTestcase(java.lang.String testCaseID,
java.lang.String description)
DEPRECATED.
|
static DriverCommand |
DDDriverDeprecatedCommands.setTestcase(java.lang.String testCaseID,
java.lang.String description)
DEPRECATED.
|
static DriverCommand |
DriverCommands.setTestDirectory(java.lang.String path)
Set/Change the directory in which the framework will find
test files (captured "actuals") by default.
|
static DriverCommand |
DDDriverCommands.setTestDirectory(java.lang.String path)
Set/Change the directory in which the framework will find
test files (captured "actuals") by default.
|
static DriverCommand |
DriverCommands.setVariableValueEx(java.lang.String[] parameters)
Set the value of a DDVariable
The name field can contain literal string, DDVariable, or
any expression that evaluates to a valid variable name.
|
static DriverCommand |
DDDriverCommands.setVariableValueEx(java.lang.String[] parameters)
Set the value of a DDVariable
The name field can contain literal string, DDVariable, or
any expression that evaluates to a valid variable name.
|
static DriverCommand |
DriverCommands.setVariableValueEx(java.lang.String variableName,
java.lang.String variableValue)
Set the value of a DDVariable
The name field can contain literal string, DDVariable, or
any expression that evaluates to a valid variable name.
|
static DriverCommand |
DDDriverCommands.setVariableValueEx(java.lang.String variableName,
java.lang.String variableValue)
Set the value of a DDVariable
The name field can contain literal string, DDVariable, or
any expression that evaluates to a valid variable name.
|
static DriverCommand |
DriverCommands.setVariableValues(java.lang.String variableName)
Preset the value of one or more DDVariables
Preset the value of one or more DDVariables.
|
static DriverCommand |
DDDriverCommands.setVariableValues(java.lang.String variableName)
Preset the value of one or more DDVariables
Preset the value of one or more DDVariables.
|
static DriverCommand |
DriverCommands.showSoftKeyboard()
Show the soft keyboard.
|
static DriverCommand |
DDDriverCommands.showSoftKeyboard()
Show the soft keyboard.
|
static DriverCommand |
DriverCommands.startCounter(java.lang.String[] parameters)
Create a new private counter or start an existing stopped private counter.
|
static DriverCommand |
DDDriverCounterCommands.startCounter(java.lang.String[] parameters)
Create a new private counter or start an existing stopped private counter.
|
static DriverCommand |
DriverCommands.startCounter(java.lang.String counterID,
java.lang.String description)
Create a new private counter or start an existing stopped private counter.
|
static DriverCommand |
DDDriverCounterCommands.startCounter(java.lang.String counterID,
java.lang.String description)
Create a new private counter or start an existing stopped private counter.
|
static DriverCommand |
DriverCommands.startCycle(java.lang.String[] parameters)
Begin tracking status on a user-defined item.
|
static DriverCommand |
DDDriverCounterCommands.startCycle(java.lang.String[] parameters)
Begin tracking status on a user-defined item.
|
static DriverCommand |
DriverCommands.startCycle(java.lang.String cycleID,
java.lang.String description)
Begin tracking status on a user-defined item.
|
static DriverCommand |
DDDriverCounterCommands.startCycle(java.lang.String cycleID,
java.lang.String description)
Begin tracking status on a user-defined item.
|
static DriverCommand |
DriverCommands.startProcedure(java.lang.String[] parameters)
Begin tracking status on a user-defined item.
|
static DriverCommand |
DDDriverCounterCommands.startProcedure(java.lang.String[] parameters)
Begin tracking status on a user-defined item.
|
static DriverCommand |
DriverCommands.startProcedure(java.lang.String procedureID,
java.lang.String description)
Begin tracking status on a user-defined item.
|
static DriverCommand |
DDDriverCounterCommands.startProcedure(java.lang.String procedureID,
java.lang.String description)
Begin tracking status on a user-defined item.
|
static DriverCommand |
DriverCommands.startRequirement(java.lang.String[] parameters)
Begin tracking status on a user-defined item.
|
static DriverCommand |
DDDriverCounterCommands.startRequirement(java.lang.String[] parameters)
Begin tracking status on a user-defined item.
|
static DriverCommand |
DriverCommands.startRequirement(java.lang.String requirementID,
java.lang.String description)
Begin tracking status on a user-defined item.
|
static DriverCommand |
DDDriverCounterCommands.startRequirement(java.lang.String requirementID,
java.lang.String description)
Begin tracking status on a user-defined item.
|
static DriverCommand |
DriverCommands.startSuite(java.lang.String[] parameters)
Begin tracking status on a user-defined item.
|
static DriverCommand |
DDDriverCounterCommands.startSuite(java.lang.String[] parameters)
Begin tracking status on a user-defined item.
|
static DriverCommand |
DriverCommands.startSuite(java.lang.String suiteID,
java.lang.String description)
Begin tracking status on a user-defined item.
|
static DriverCommand |
DDDriverCounterCommands.startSuite(java.lang.String suiteID,
java.lang.String description)
Begin tracking status on a user-defined item.
|
static DriverCommand |
DriverCommands.startTestcase(java.lang.String[] parameters)
Begin tracking status on a user-defined TestCase.
|
static DriverCommand |
DDDriverCounterCommands.startTestcase(java.lang.String[] parameters)
Begin tracking status on a user-defined TestCase.
|
static DriverCommand |
DriverCommands.startTestcase(java.lang.String testCaseID,
java.lang.String description)
Begin tracking status on a user-defined TestCase.
|
static DriverCommand |
DDDriverCounterCommands.startTestcase(java.lang.String testCaseID,
java.lang.String description)
Begin tracking status on a user-defined TestCase.
|
static DriverCommand |
DriverCommands.startTimer(java.lang.String[] parameters)
Will start a unique timer.
|
static DriverCommand |
DDDriverTimerCommands.startTimer(java.lang.String[] parameters)
Will start a unique timer.
|
static DriverCommand |
DriverCommands.startTimer(java.lang.String timerName,
java.lang.String verifyValue)
Will start a unique timer.
|
static DriverCommand |
DDDriverTimerCommands.startTimer(java.lang.String timerName,
java.lang.String verifyValue)
Will start a unique timer.
|
static DriverCommand |
DriverCommands.startWebBrowser(java.lang.String[] parameters)
Launch a new web browser and optionally load a document into it.
|
static DriverCommand |
DDDriverCommands.startWebBrowser(java.lang.String[] parameters)
Launch a new web browser and optionally load a document into it.
|
static DriverCommand |
DriverCommands.startWebBrowser(java.lang.String uRL,
java.lang.String windowTag,
java.lang.String browserName,
java.lang.String timeout,
java.lang.String isRemoteBrowser,
java.lang.String extraParamKey,
java.lang.String extraParamValue)
Launch a new web browser and optionally load a document into it.
|
static DriverCommand |
DDDriverCommands.startWebBrowser(java.lang.String uRL,
java.lang.String windowTag,
java.lang.String browserName,
java.lang.String timeout,
java.lang.String isRemoteBrowser,
java.lang.String extraParamKey,
java.lang.String extraParamValue)
Launch a new web browser and optionally load a document into it.
|
static DriverCommand |
DriverCommands.stopCounter(java.lang.String[] parameters)
Create a new private counter or suspend counts in an existing private counter.
|
static DriverCommand |
DDDriverCounterCommands.stopCounter(java.lang.String[] parameters)
Create a new private counter or suspend counts in an existing private counter.
|
static DriverCommand |
DriverCommands.stopCounter(java.lang.String counterID,
java.lang.String description)
Create a new private counter or suspend counts in an existing private counter.
|
static DriverCommand |
DDDriverCounterCommands.stopCounter(java.lang.String counterID,
java.lang.String description)
Create a new private counter or suspend counts in an existing private counter.
|
static DriverCommand |
DriverCommands.stopCycle(java.lang.String[] parameters)
Stop tracking status on a user-defined item.
|
static DriverCommand |
DDDriverCounterCommands.stopCycle(java.lang.String[] parameters)
Stop tracking status on a user-defined item.
|
static DriverCommand |
DriverCommands.stopCycle(java.lang.String cycleID,
java.lang.String description)
Stop tracking status on a user-defined item.
|
static DriverCommand |
DDDriverCounterCommands.stopCycle(java.lang.String cycleID,
java.lang.String description)
Stop tracking status on a user-defined item.
|
static DriverCommand |
DriverCommands.stopProcedure(java.lang.String[] parameters)
Stop tracking status on a user-defined item.
|
static DriverCommand |
DDDriverCounterCommands.stopProcedure(java.lang.String[] parameters)
Stop tracking status on a user-defined item.
|
static DriverCommand |
DriverCommands.stopProcedure(java.lang.String procedureID,
java.lang.String description)
Stop tracking status on a user-defined item.
|
static DriverCommand |
DDDriverCounterCommands.stopProcedure(java.lang.String procedureID,
java.lang.String description)
Stop tracking status on a user-defined item.
|
static DriverCommand |
DriverCommands.stopRequirement(java.lang.String[] parameters)
Stop tracking status on a user-defined item.
|
static DriverCommand |
DDDriverCounterCommands.stopRequirement(java.lang.String[] parameters)
Stop tracking status on a user-defined item.
|
static DriverCommand |
DriverCommands.stopRequirement(java.lang.String requirementID,
java.lang.String description)
Stop tracking status on a user-defined item.
|
static DriverCommand |
DDDriverCounterCommands.stopRequirement(java.lang.String requirementID,
java.lang.String description)
Stop tracking status on a user-defined item.
|
static DriverCommand |
DriverCommands.stopSuite(java.lang.String[] parameters)
Stop tracking status on a user-defined item.
|
static DriverCommand |
DDDriverCounterCommands.stopSuite(java.lang.String[] parameters)
Stop tracking status on a user-defined item.
|
static DriverCommand |
DriverCommands.stopSuite(java.lang.String suiteID,
java.lang.String description)
Stop tracking status on a user-defined item.
|
static DriverCommand |
DDDriverCounterCommands.stopSuite(java.lang.String suiteID,
java.lang.String description)
Stop tracking status on a user-defined item.
|
static DriverCommand |
DriverCommands.stopTestcase(java.lang.String[] parameters)
Stop tracking status on a user-defined TestCase.
|
static DriverCommand |
DDDriverCounterCommands.stopTestcase(java.lang.String[] parameters)
Stop tracking status on a user-defined TestCase.
|
static DriverCommand |
DriverCommands.stopTestcase(java.lang.String testCaseID,
java.lang.String description)
Stop tracking status on a user-defined TestCase.
|
static DriverCommand |
DDDriverCounterCommands.stopTestcase(java.lang.String testCaseID,
java.lang.String description)
Stop tracking status on a user-defined TestCase.
|
static DriverCommand |
DriverCommands.stopTimer(java.lang.String timerName)
Will end a unique timer and perform a verify test if a value was supplied at start time.
|
static DriverCommand |
DDDriverTimerCommands.stopTimer(java.lang.String timerName)
Will end a unique timer and perform a verify test if a value was supplied at start time.
|
static DriverCommand |
DriverCommands.stopWebBrowser(java.lang.String browserID)
Stop an opened web browser indicated by ID.
|
static DriverCommand |
DDDriverCommands.stopWebBrowser(java.lang.String browserID)
Stop an opened web browser indicated by ID.
|
static DriverCommand |
DriverCommands.storeCounterInfo(java.lang.String[] parameters)
Store the current values of the named counter into unique DDVariables.
|
static DriverCommand |
DDDriverCounterCommands.storeCounterInfo(java.lang.String[] parameters)
Store the current values of the named counter into unique DDVariables.
|
static DriverCommand |
DriverCommands.storeCounterInfo(java.lang.String counterID,
java.lang.String varPrefix)
Store the current values of the named counter into unique DDVariables.
|
static DriverCommand |
DDDriverCounterCommands.storeCounterInfo(java.lang.String counterID,
java.lang.String varPrefix)
Store the current values of the named counter into unique DDVariables.
|
static DriverCommand |
DriverCommands.storeTimerInfo(java.lang.String[] parameters)
Well store the timer information in the given variable.
|
static DriverCommand |
DDDriverTimerCommands.storeTimerInfo(java.lang.String[] parameters)
Well store the timer information in the given variable.
|
static DriverCommand |
DriverCommands.storeTimerInfo(java.lang.String timerName,
java.lang.String variable)
Well store the timer information in the given variable.
|
static DriverCommand |
DDDriverTimerCommands.storeTimerInfo(java.lang.String timerName,
java.lang.String variable)
Well store the timer information in the given variable.
|
static DriverCommand |
DriverCommands.storeTimerInfoFile(java.lang.String[] parameters)
Well store the timer information in the given file, in csv format.
|
static DriverCommand |
DDDriverTimerCommands.storeTimerInfoFile(java.lang.String[] parameters)
Well store the timer information in the given file, in csv format.
|
static DriverCommand |
DriverCommands.storeTimerInfoFile(java.lang.String timerName,
java.lang.String fileLoc)
Well store the timer information in the given file, in csv format.
|
static DriverCommand |
DDDriverTimerCommands.storeTimerInfoFile(java.lang.String timerName,
java.lang.String fileLoc)
Well store the timer information in the given file, in csv format.
|
static DriverCommand |
DriverCommands.subString(java.lang.String[] parameters)
Returns a portion of a string based on character index.
|
static DriverCommand |
DDDriverStringCommands.subString(java.lang.String[] parameters)
Returns a portion of a string based on character index.
|
static DriverCommand |
DriverCommands.subString(java.lang.String sourceString,
java.lang.String start,
java.lang.String length,
java.lang.String resultVar)
Returns a portion of a string based on character index.
|
static DriverCommand |
DDDriverStringCommands.subString(java.lang.String sourceString,
java.lang.String start,
java.lang.String length,
java.lang.String resultVar)
Returns a portion of a string based on character index.
|
static DriverCommand |
DriverCommands.suspendLogging(java.lang.String logName)
Suspend all logging.
|
static DriverCommand |
DDDriverLogCommands.suspendLogging(java.lang.String logName)
Suspend all logging.
|
static DriverCommand |
DriverCommands.suspendStatusCounts(java.lang.String[] parameters)
Suspend counting on ALL status counters--both public/global and private.
|
static DriverCommand |
DDDriverCounterCommands.suspendStatusCounts(java.lang.String[] parameters)
Suspend counting on ALL status counters--both public/global and private.
|
static DriverCommand |
DriverCommands.suspendStatusCounts(java.lang.String description,
java.lang.String logName)
Suspend counting on ALL status counters--both public/global and private.
|
static DriverCommand |
DDDriverCounterCommands.suspendStatusCounts(java.lang.String description,
java.lang.String logName)
Suspend counting on ALL status counters--both public/global and private.
|
static DriverCommand |
DriverCommands.switchWindow(java.lang.String[] parameters)
Switch between multiple windows according to its title.
|
static DriverCommand |
DDDriverCommands.switchWindow(java.lang.String[] parameters)
Switch between multiple windows according to its title.
|
static DriverCommand |
DriverCommands.switchWindow(java.lang.String title,
java.lang.String browserID,
java.lang.String expectedMatchIndex,
java.lang.String partialMatch,
java.lang.String ignoreCase)
Switch between multiple windows according to its title.
|
static DriverCommand |
DDDriverCommands.switchWindow(java.lang.String title,
java.lang.String browserID,
java.lang.String expectedMatchIndex,
java.lang.String partialMatch,
java.lang.String ignoreCase)
Switch between multiple windows according to its title.
|
static DriverCommand |
DriverCommands.takeScreenShot(java.lang.String[] parameters)
Take screenshot and save it to a file on test machine.
|
static DriverCommand |
DDDriverCommands.takeScreenShot(java.lang.String[] parameters)
Take screenshot and save it to a file on test machine.
|
static DriverCommand |
DriverCommands.takeScreenShot(java.lang.String fileName,
java.lang.String rotatable,
java.lang.String subArea)
Take screenshot and save it to a file on test machine.
|
static DriverCommand |
DDDriverCommands.takeScreenShot(java.lang.String fileName,
java.lang.String rotatable,
java.lang.String subArea)
Take screenshot and save it to a file on test machine.
|
static DriverCommand |
DriverCommands.testDebug(java.lang.String mode)
Enable and Disable (T)Test Record Debugging.
|
static DriverCommand |
DDDriverDebugCommands.testDebug(java.lang.String mode)
Enable and Disable (T)Test Record Debugging.
|
static DriverCommand |
DriverCommands.toLowerCase(java.lang.String[] parameters)
Returns a copy of a string, with all letters converted to lowercase.
|
static DriverCommand |
DDDriverStringCommands.toLowerCase(java.lang.String[] parameters)
Returns a copy of a string, with all letters converted to lowercase.
|
static DriverCommand |
DriverCommands.toLowerCase(java.lang.String sourceString,
java.lang.String resultVar)
Returns a copy of a string, with all letters converted to lowercase.
|
static DriverCommand |
DDDriverStringCommands.toLowerCase(java.lang.String sourceString,
java.lang.String resultVar)
Returns a copy of a string, with all letters converted to lowercase.
|
static DriverCommand |
DriverCommands.toUpperCase(java.lang.String[] parameters)
Returns a copy of a string after converting all letters to uppercase.
|
static DriverCommand |
DDDriverStringCommands.toUpperCase(java.lang.String[] parameters)
Returns a copy of a string after converting all letters to uppercase.
|
static DriverCommand |
DriverCommands.toUpperCase(java.lang.String sourceString,
java.lang.String resultVar)
Returns a copy of a string after converting all letters to uppercase.
|
static DriverCommand |
DDDriverStringCommands.toUpperCase(java.lang.String sourceString,
java.lang.String resultVar)
Returns a copy of a string after converting all letters to uppercase.
|
static DriverCommand |
DriverCommands.trim(java.lang.String[] parameters)
A new string trimmed of leading and trailing tabs and spaces.
|
static DriverCommand |
DDDriverStringCommands.trim(java.lang.String[] parameters)
A new string trimmed of leading and trailing tabs and spaces.
|
static DriverCommand |
DriverCommands.trim(java.lang.String sourceString,
java.lang.String resultVar)
A new string trimmed of leading and trailing tabs and spaces.
|
static DriverCommand |
DDDriverStringCommands.trim(java.lang.String sourceString,
java.lang.String resultVar)
A new string trimmed of leading and trailing tabs and spaces.
|
static DriverCommand |
DriverCommands.useAbbotFunctions(java.lang.String mode)
Enable/Disable the switch to "prefer" ABBOT Functions over
any other engine functions.
|
static DriverCommand |
DDDriverCommands.useAbbotFunctions(java.lang.String mode)
Enable/Disable the switch to "prefer" ABBOT Functions over
any other engine functions.
|
static DriverCommand |
DriverCommands.useDroidFunctions(java.lang.String mode)
Enable/Disable the switch to "prefer" Droid Functions over
the current engine functions (like Robot Classic).
|
static DriverCommand |
DDDriverCommands.useDroidFunctions(java.lang.String mode)
Enable/Disable the switch to "prefer" Droid Functions over
the current engine functions (like Robot Classic).
|
static DriverCommand |
DriverCommands.useIOSFunctions(java.lang.String mode)
Enable/Disable the switch to "prefer" IOS Functions over
any other engine functions.
|
static DriverCommand |
DDDriverCommands.useIOSFunctions(java.lang.String mode)
Enable/Disable the switch to "prefer" IOS Functions over
any other engine functions.
|
static DriverCommand |
DriverCommands.useLocalFlowControl(java.lang.String state)
When TRUE then flow control block IDs have current table scope only.
|
static DriverCommand |
DDDriverFlowCommands.useLocalFlowControl(java.lang.String state)
When TRUE then flow control block IDs have current table scope only.
|
static DriverCommand |
DriverCommands.useQTPFunctions(java.lang.String mode)
Enable/Disable the switch to "prefer" QTP Functions over
any other engine functions.
|
static DriverCommand |
DDDriverCommands.useQTPFunctions(java.lang.String mode)
Enable/Disable the switch to "prefer" QTP Functions over
any other engine functions.
|
static DriverCommand |
DriverCommands.useRobotJFunctions(java.lang.String mode)
Enable/Disable the switch to "prefer" RobotJ Hook Component Functions over
Robot Classic Component Functions.
|
static DriverCommand |
DDDriverCommands.useRobotJFunctions(java.lang.String mode)
Enable/Disable the switch to "prefer" RobotJ Hook Component Functions over
Robot Classic Component Functions.
|
static DriverCommand |
DriverCommands.useSAFSFunctions(java.lang.String mode)
Enable/Disable the switch to "prefer" SAFS (SDC) Functions over
the current engine functions (like Robot Classic).
|
static DriverCommand |
DDDriverCommands.useSAFSFunctions(java.lang.String mode)
Enable/Disable the switch to "prefer" SAFS (SDC) Functions over
the current engine functions (like Robot Classic).
|
static DriverCommand |
DriverCommands.useSeleniumFunctions(java.lang.String mode)
Enable/Disable the switch to "prefer" Selenium Functions over
the current engine functions (like Robot Classic).
|
static DriverCommand |
DDDriverCommands.useSeleniumFunctions(java.lang.String mode)
Enable/Disable the switch to "prefer" Selenium Functions over
the current engine functions (like Robot Classic).
|
static DriverCommand |
DriverCommands.useTestCompleteFunctions(java.lang.String mode)
Enable/Disable the switch to "prefer" TestComplete (TCAFS) Functions over
any other engine functions.
|
static DriverCommand |
DDDriverCommands.useTestCompleteFunctions(java.lang.String mode)
Enable/Disable the switch to "prefer" TestComplete (TCAFS) Functions over
any other engine functions.
|
static DriverCommand |
DriverCommands.useWebBrowser(java.lang.String browserID)
Switch to use an opened web browser indicated by ID.
|
static DriverCommand |
DDDriverCommands.useWebBrowser(java.lang.String browserID)
Switch to use an opened web browser indicated by ID.
|
static DriverCommand |
DriverCommands.verifyClipboardToFile(java.lang.String[] parameters)
Verify the current contents of the Windows clipboard with a benchmark file.
|
static DriverCommand |
DDDriverCommands.verifyClipboardToFile(java.lang.String[] parameters)
Verify the current contents of the Windows clipboard with a benchmark file.
|
static DriverCommand |
DriverCommands.verifyClipboardToFile(java.lang.String benchmarkFile,
java.lang.String encoding)
Verify the current contents of the Windows clipboard with a benchmark file.
|
static DriverCommand |
DDDriverCommands.verifyClipboardToFile(java.lang.String benchmarkFile,
java.lang.String encoding)
Verify the current contents of the Windows clipboard with a benchmark file.
|
static DriverCommand |
DriverCommands.verifyDatabaseNullValue(java.lang.String[] parameters)
Verifies the value of a field in a database table is NULL
Verifies the value of a field in a database table is NULL.
|
static DriverCommand |
DDDriverDatabaseCommands.verifyDatabaseNullValue(java.lang.String[] parameters)
Verifies the value of a field in a database table is NULL
Verifies the value of a field in a database table is NULL.
|
static DriverCommand |
DriverCommands.verifyDatabaseNullValue(java.lang.String aDBAlias,
java.lang.String aTableAlias,
java.lang.String dBFieldName,
java.lang.String dBTableName,
java.lang.String dBQueryCond,
java.lang.String dBSourceName,
java.lang.String userID,
java.lang.String password,
java.lang.String sQLStatus)
Verifies the value of a field in a database table is NULL
Verifies the value of a field in a database table is NULL.
|
static DriverCommand |
DDDriverDatabaseCommands.verifyDatabaseNullValue(java.lang.String aDBAlias,
java.lang.String aTableAlias,
java.lang.String dBFieldName,
java.lang.String dBTableName,
java.lang.String dBQueryCond,
java.lang.String dBSourceName,
java.lang.String userID,
java.lang.String password,
java.lang.String sQLStatus)
Verifies the value of a field in a database table is NULL
Verifies the value of a field in a database table is NULL.
|
static DriverCommand |
DriverCommands.verifyDatabaseValue(java.lang.String[] parameters)
Verifies the case-sensitive value of a field in a database table
Verifies the case-sensitive value of a field in a database table.
|
static DriverCommand |
DDDriverDatabaseCommands.verifyDatabaseValue(java.lang.String[] parameters)
Verifies the case-sensitive value of a field in a database table
Verifies the case-sensitive value of a field in a database table.
|
static DriverCommand |
DriverCommands.verifyDatabaseValue(java.lang.String aDBAlias,
java.lang.String aTableAlias,
java.lang.String dBFieldName,
java.lang.String dBTableName,
java.lang.String dBQueryCond,
java.lang.String dBSourceName,
java.lang.String userID,
java.lang.String password,
java.lang.String expectedValue,
java.lang.String sQLStatus)
Verifies the case-sensitive value of a field in a database table
Verifies the case-sensitive value of a field in a database table.
|
static DriverCommand |
DDDriverDatabaseCommands.verifyDatabaseValue(java.lang.String aDBAlias,
java.lang.String aTableAlias,
java.lang.String dBFieldName,
java.lang.String dBTableName,
java.lang.String dBQueryCond,
java.lang.String dBSourceName,
java.lang.String userID,
java.lang.String password,
java.lang.String expectedValue,
java.lang.String sQLStatus)
Verifies the case-sensitive value of a field in a database table
Verifies the case-sensitive value of a field in a database table.
|
static DriverCommand |
DriverCommands.verifyDBNullValue(java.lang.String[] parameters)
Verifies the value of a field in a database table is NULL
Verifies the value of a field in a database table is NULL.
|
static DriverCommand |
DDDriverDatabaseCommands.verifyDBNullValue(java.lang.String[] parameters)
Verifies the value of a field in a database table is NULL
Verifies the value of a field in a database table is NULL.
|
static DriverCommand |
DriverCommands.verifyDBNullValue(java.lang.String aDBAlias,
java.lang.String aTableAlias,
java.lang.String dBFieldName,
java.lang.String dBTableName,
java.lang.String dBQueryCond,
java.lang.String dBSourceName,
java.lang.String userID,
java.lang.String password,
java.lang.String sQLStatus)
Verifies the value of a field in a database table is NULL
Verifies the value of a field in a database table is NULL.
|
static DriverCommand |
DDDriverDatabaseCommands.verifyDBNullValue(java.lang.String aDBAlias,
java.lang.String aTableAlias,
java.lang.String dBFieldName,
java.lang.String dBTableName,
java.lang.String dBQueryCond,
java.lang.String dBSourceName,
java.lang.String userID,
java.lang.String password,
java.lang.String sQLStatus)
Verifies the value of a field in a database table is NULL
Verifies the value of a field in a database table is NULL.
|
static DriverCommand |
DriverCommands.verifyDBValue(java.lang.String[] parameters)
Verifies the case-sensitive value of a field in a database table
Verifies the case-sensitive value of a field in a database table.
|
static DriverCommand |
DDDriverDatabaseCommands.verifyDBValue(java.lang.String[] parameters)
Verifies the case-sensitive value of a field in a database table
Verifies the case-sensitive value of a field in a database table.
|
static DriverCommand |
DriverCommands.verifyDBValue(java.lang.String aDBAlias,
java.lang.String aTableAlias,
java.lang.String dBFieldName,
java.lang.String dBTableName,
java.lang.String dBQueryCond,
java.lang.String dBSourceName,
java.lang.String userID,
java.lang.String password,
java.lang.String expectedValue,
java.lang.String sQLStatus)
Verifies the case-sensitive value of a field in a database table
Verifies the case-sensitive value of a field in a database table.
|
static DriverCommand |
DDDriverDatabaseCommands.verifyDBValue(java.lang.String aDBAlias,
java.lang.String aTableAlias,
java.lang.String dBFieldName,
java.lang.String dBTableName,
java.lang.String dBQueryCond,
java.lang.String dBSourceName,
java.lang.String userID,
java.lang.String password,
java.lang.String expectedValue,
java.lang.String sQLStatus)
Verifies the case-sensitive value of a field in a database table
Verifies the case-sensitive value of a field in a database table.
|
static DriverCommand |
DriverCommands.verifyElapsedTimeInRange(java.lang.String[] parameters)
Well verify that a timer was in the range of the given values.
|
static DriverCommand |
DDDriverTimerCommands.verifyElapsedTimeInRange(java.lang.String[] parameters)
Well verify that a timer was in the range of the given values.
|
static DriverCommand |
DriverCommands.verifyElapsedTimeInRange(java.lang.String timerName,
java.lang.String verifyValue1,
java.lang.String verifyValue2)
Well verify that a timer was in the range of the given values.
|
static DriverCommand |
DDDriverTimerCommands.verifyElapsedTimeInRange(java.lang.String timerName,
java.lang.String verifyValue1,
java.lang.String verifyValue2)
Well verify that a timer was in the range of the given values.
|
static DriverCommand |
DriverCommands.verifyElapsedTimeIsLess(java.lang.String[] parameters)
Well verify that a timer was less then the given value.
|
static DriverCommand |
DDDriverTimerCommands.verifyElapsedTimeIsLess(java.lang.String[] parameters)
Well verify that a timer was less then the given value.
|
static DriverCommand |
DriverCommands.verifyElapsedTimeIsLess(java.lang.String timerName,
java.lang.String verifyValue)
Well verify that a timer was less then the given value.
|
static DriverCommand |
DDDriverTimerCommands.verifyElapsedTimeIsLess(java.lang.String timerName,
java.lang.String verifyValue)
Well verify that a timer was less then the given value.
|
static DriverCommand |
DriverCommands.verifyElapsedTimeIsMore(java.lang.String[] parameters)
Well verify that a timer was greater then the given value.
|
static DriverCommand |
DDDriverTimerCommands.verifyElapsedTimeIsMore(java.lang.String[] parameters)
Well verify that a timer was greater then the given value.
|
static DriverCommand |
DriverCommands.verifyElapsedTimeIsMore(java.lang.String timerName,
java.lang.String verifyValue)
Well verify that a timer was greater then the given value.
|
static DriverCommand |
DDDriverTimerCommands.verifyElapsedTimeIsMore(java.lang.String timerName,
java.lang.String verifyValue)
Well verify that a timer was greater then the given value.
|
static DriverCommand |
DriverCommands.verifyTimer(java.lang.String[] parameters)
Well verify that a timer was less then the given value.
|
static DriverCommand |
DDDriverTimerCommands.verifyTimer(java.lang.String[] parameters)
Well verify that a timer was less then the given value.
|
static DriverCommand |
DriverCommands.verifyTimer(java.lang.String timerName,
java.lang.String verifyValue)
Well verify that a timer was less then the given value.
|
static DriverCommand |
DDDriverTimerCommands.verifyTimer(java.lang.String timerName,
java.lang.String verifyValue)
Well verify that a timer was less then the given value.
|
static DriverCommand |
DriverCommands.verifyURLContent(java.lang.String[] parameters)
Send an HTTP GET request, and verify the response with the content provided as parameter.
|
static DriverCommand |
DDDriverCommands.verifyURLContent(java.lang.String[] parameters)
Send an HTTP GET request, and verify the response with the content provided as parameter.
|
static DriverCommand |
DriverCommands.verifyURLContent(java.lang.String uRL,
java.lang.String benchContent,
java.lang.String timeout,
java.lang.String headerName,
java.lang.String headerValue)
Send an HTTP GET request, and verify the response with the content provided as parameter.
|
static DriverCommand |
DDDriverCommands.verifyURLContent(java.lang.String uRL,
java.lang.String benchContent,
java.lang.String timeout,
java.lang.String headerName,
java.lang.String headerValue)
Send an HTTP GET request, and verify the response with the content provided as parameter.
|
static DriverCommand |
DriverCommands.verifyURLToFile(java.lang.String[] parameters)
Send an HTTP GET request, and verify the response with the content of a file.
|
static DriverCommand |
DDDriverCommands.verifyURLToFile(java.lang.String[] parameters)
Send an HTTP GET request, and verify the response with the content of a file.
|
static DriverCommand |
DriverCommands.verifyURLToFile(java.lang.String uRL,
java.lang.String benchFile,
java.lang.String timeout,
java.lang.String headerName,
java.lang.String headerValue)
Send an HTTP GET request, and verify the response with the content of a file.
|
static DriverCommand |
DDDriverCommands.verifyURLToFile(java.lang.String uRL,
java.lang.String benchFile,
java.lang.String timeout,
java.lang.String headerName,
java.lang.String headerValue)
Send an HTTP GET request, and verify the response with the content of a file.
|
static DriverCommand |
DriverCommands.version(java.lang.String version)
Specify the table format VERSION
Used to specify the VERSION of the table format.
|
static DriverCommand |
DDDriverCommands.version(java.lang.String version)
Specify the table format VERSION
Used to specify the VERSION of the table format.
|
static DriverCommand |
DriverCommands.waitForGUI(java.lang.String[] parameters)
Wait for a Window or Window Component to become valid.
|
static DriverCommand |
DDDriverCommands.waitForGUI(java.lang.String[] parameters)
Wait for a Window or Window Component to become valid.
|
static DriverCommand |
DriverCommands.waitForGUI(java.lang.String windowID,
java.lang.String componentID,
java.lang.String timeout)
Wait for a Window or Window Component to become valid.
|
static DriverCommand |
DDDriverCommands.waitForGUI(java.lang.String windowID,
java.lang.String componentID,
java.lang.String timeout)
Wait for a Window or Window Component to become valid.
|
static DriverCommand |
DriverCommands.waitForGUIGone(java.lang.String[] parameters)
Wait for a Window or Window Component to become invalid.
|
static DriverCommand |
DDDriverCommands.waitForGUIGone(java.lang.String[] parameters)
Wait for a Window or Window Component to become invalid.
|
static DriverCommand |
DriverCommands.waitForGUIGone(java.lang.String windowID,
java.lang.String componentID,
java.lang.String timeout)
Wait for a Window or Window Component to become invalid.
|
static DriverCommand |
DDDriverCommands.waitForGUIGone(java.lang.String windowID,
java.lang.String componentID,
java.lang.String timeout)
Wait for a Window or Window Component to become invalid.
|
static DriverCommand |
DriverCommands.waitForPropertyValue(java.lang.String[] parameters)
Wait for a specific Window or Component property value to match an expected value.
|
static DriverCommand |
DDDriverCommands.waitForPropertyValue(java.lang.String[] parameters)
Wait for a specific Window or Component property value to match an expected value.
|
static DriverCommand |
DriverCommands.waitForPropertyValue(java.lang.String windowID,
java.lang.String componentID,
java.lang.String propertyName,
java.lang.String expectedValue,
java.lang.String timeout,
java.lang.String caseInsensitive)
Wait for a specific Window or Component property value to match an expected value.
|
static DriverCommand |
DDDriverCommands.waitForPropertyValue(java.lang.String windowID,
java.lang.String componentID,
java.lang.String propertyName,
java.lang.String expectedValue,
java.lang.String timeout,
java.lang.String caseInsensitive)
Wait for a specific Window or Component property value to match an expected value.
|
static DriverCommand |
DriverCommands.waitForPropertyValueGone(java.lang.String[] parameters)
Wait for a specific Window or Component property value to change from a known value.
|
static DriverCommand |
DDDriverCommands.waitForPropertyValueGone(java.lang.String[] parameters)
Wait for a specific Window or Component property value to change from a known value.
|
static DriverCommand |
DriverCommands.waitForPropertyValueGone(java.lang.String windowID,
java.lang.String componentID,
java.lang.String propertyName,
java.lang.String expectedValue,
java.lang.String timeout,
java.lang.String caseInsensitive)
Wait for a specific Window or Component property value to change from a known value.
|
static DriverCommand |
DDDriverCommands.waitForPropertyValueGone(java.lang.String windowID,
java.lang.String componentID,
java.lang.String propertyName,
java.lang.String expectedValue,
java.lang.String timeout,
java.lang.String caseInsensitive)
Wait for a specific Window or Component property value to change from a known value.
|
static DriverCommand |
DriverCommands.waitForRegistryKeyExists(java.lang.String[] parameters)
Wait for a Registry Key to become valid.
|
static DriverCommand |
DDDriverCommands.waitForRegistryKeyExists(java.lang.String[] parameters)
Wait for a Registry Key to become valid.
|
static DriverCommand |
DriverCommands.waitForRegistryKeyExists(java.lang.String key,
java.lang.String keyValue,
java.lang.String timeout)
Wait for a Registry Key to become valid.
|
static DriverCommand |
DDDriverCommands.waitForRegistryKeyExists(java.lang.String key,
java.lang.String keyValue,
java.lang.String timeout)
Wait for a Registry Key to become valid.
|
static DriverCommand |
DriverCommands.waitForRegistryKeyValue(java.lang.String[] parameters)
Wait for a specific Registry KeyValue to match an expected value.
|
static DriverCommand |
DDDriverCommands.waitForRegistryKeyValue(java.lang.String[] parameters)
Wait for a specific Registry KeyValue to match an expected value.
|
static DriverCommand |
DriverCommands.waitForRegistryKeyValue(java.lang.String key,
java.lang.String keyValue,
java.lang.String expectedValue,
java.lang.String timeout,
java.lang.String caseInsensitive)
Wait for a specific Registry KeyValue to match an expected value.
|
static DriverCommand |
DDDriverCommands.waitForRegistryKeyValue(java.lang.String key,
java.lang.String keyValue,
java.lang.String expectedValue,
java.lang.String timeout,
java.lang.String caseInsensitive)
Wait for a specific Registry KeyValue to match an expected value.
|
static DriverCommand |
DriverCommands.waitForWebPage(java.lang.String[] parameters)
Wait for a web document to finish loading within a timeout period.
|
static DriverCommand |
DDDriverCommands.waitForWebPage(java.lang.String[] parameters)
Wait for a web document to finish loading within a timeout period.
|
static DriverCommand |
DriverCommands.waitForWebPage(java.lang.String windowID,
java.lang.String componentID,
java.lang.String timeout)
Wait for a web document to finish loading within a timeout period.
|
static DriverCommand |
DDDriverCommands.waitForWebPage(java.lang.String windowID,
java.lang.String componentID,
java.lang.String timeout)
Wait for a web document to finish loading within a timeout period.
|
static DriverCommand |
DriverCommands.writeFileChars(java.lang.String[] parameters)
Write the specified number of characters to a file already opened for writing.
|
static DriverCommand |
DDDriverFileCommands.writeFileChars(java.lang.String[] parameters)
Write the specified number of characters to a file already opened for writing.
|
static DriverCommand |
DriverCommands.writeFileChars(java.lang.String fileNumber,
java.lang.String numberOfChars,
java.lang.String expressionList)
Write the specified number of characters to a file already opened for writing.
|
static DriverCommand |
DDDriverFileCommands.writeFileChars(java.lang.String fileNumber,
java.lang.String numberOfChars,
java.lang.String expressionList)
Write the specified number of characters to a file already opened for writing.
|
Modifier and Type | Method and Description |
---|---|
TestRecordHelper |
JSAFSDriver.runDriverCommand(DriverCommand command)
Execute the desired DriverCommand using the default field separator for the record.
|
TestRecordHelper |
JSAFSDriver.runDriverCommand(DriverCommand command,
java.lang.String separator)
Execute the desired DriverCommand using the specified field separator for the record.
This implementation tries following engines in this order: |
protected TestRecordHelper |
JSAFSDriver.runDriverCommandDirect(DriverCommand command,
java.lang.String separator)
Deprecated.
|
Copyright © SAS Institute. All Rights Reserved.